| Slant Six Forum https://www.slantsix.org/forum/ |
|
| 904 front pump seal https://www.slantsix.org/forum/viewtopic.php?t=51068 |
Page 1 of 1 |
| Author: | Danarchy [ Sun Feb 10, 2013 1:11 pm ] |
| Post subject: | 904 front pump seal |
Are there different seals for the front pump to torque converter on a 904? I purchased one at NAPA (ATP13402)and it is too big??? Anyone have any ideas, or a different crossover? All for 1964 Dart GT 225 /6-Thanks |
|
| Author: | Danarchy [ Sun Feb 10, 2013 4:26 pm ] |
| Post subject: | |
Nevermind. Oreillys Auto Parts came through!(and I have never been a Big Fan of them, until now!) Pioneer Inc. - Seal Part Number: 759030 UPC: 84546666913 |
|
| Author: | Doc [ Tue Feb 12, 2013 8:43 am ] |
| Post subject: | |
A leaking front pump seal is usually a sign that the front pump bushing is worn and needs replacing. Said another way.... always replace the pump bushing, along with the front seal. DD |
|
| Author: | Danarchy [ Tue Feb 12, 2013 10:18 am ] |
| Post subject: | |
When I pulled the Torque Converter off, I noticed that the spring around the seal had come off(I thought  ), but whoever replaced the seal before I had the car must have left the old seal/spring on there, because the seal I took out had the spring on it??? So I took the extra spring out and replaced the seal. There is minimal movement, so I don't believe the bushing is bad. The front pump seal did not leak.
|
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|