You can look at my photos......just click on the red link below my name.
My car came with a 1945 but replaced it with a 1920 Economaster. It shows the cable linkage and springs.....
| Slant Six Forum https://www.slantsix.org/forum/ |
|
| can someone please help?? https://www.slantsix.org/forum/viewtopic.php?t=51283 |
Page 1 of 1 |
| Author: | 86ramslant6 [ Sat Mar 02, 2013 2:44 pm ] |
| Post subject: | can someone please help?? |
I am trying to finish the intake and exhaust manifold on my truck and I can't remember how the linkages go on the carb. also I can't seem to remember where the springs go. PLEASE HELP! I need to get the truck back on the road. Thanks |
|
| Author: | 64ragtop [ Sat Mar 02, 2013 3:46 pm ] |
| Post subject: | |
It would be a big help if we knew what year and make /model carb you're installing. Linkages, springs and vacuum hoses change with those factors. Help us help you. ATB BC |
|
| Author: | 86ramslant6 [ Sat Mar 02, 2013 4:15 pm ] |
| Post subject: | |
thought about that after i went back outside. My truck is an 86 and i have a holley 1945 carb. I have the vacuum lines figured out just need the linkages and springs thank you |
|
| Author: | Aggressive Ted [ Sat Mar 02, 2013 4:18 pm ] |
| Post subject: | |
You can look at my photos......just click on the red link below my name. My car came with a 1945 but replaced it with a 1920 Economaster. It shows the cable linkage and springs.....
|
|
| Author: | 86ramslant6 [ Sun Mar 03, 2013 2:38 pm ] |
| Post subject: | |
Quote: You can look at my photos......just click on the red link below my name.
thanks! your pictures help me a little but it may be better if someone that has the same setup as me could help. I have 3 springs and am only seeing 2 on your setup.
My car came with a 1945 but replaced it with a 1920 Economaster. It shows the cable linkage and springs..... |
|
| Author: | Reed [ Sun Mar 03, 2013 5:51 pm ] |
| Post subject: | |
Two springs are the throttle return springs, one spring is the kickdown linkage tensioning spring. The two springs have a large coil and a small coil. The small coil nests inside the large coil. This "spring pack" runs between the throttle arm on the carb and a little bracket that bolts to the choke thermostat pocket on the exhaust manifold. The third spring hooks to the kickdown arm and to the throttle arm on the carb. |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|