The cam is an Erson 280 off the shelf. No mods.
Rockers are RAS AL rollers, 1.6 on the intake, 1.5 on the exhaust.
CJ
| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Linda took a video https://www.slantsix.org/forum/viewtopic.php?t=51784 |
Page 1 of 1 |
| Author: | ceej [ Sat Apr 20, 2013 8:49 pm ] |
| Post subject: | Linda took a video |
First round today at Woodburn. |
|
| Author: | Aggressive Ted [ Sat Apr 20, 2013 9:51 pm ] |
| Post subject: | |
Nice and smooth! What cam is that? That SL6 sounds like a V8! |
|
| Author: | wvenable [ Sun Apr 21, 2013 4:26 am ] |
| Post subject: | |
Cool! Thanks for sharing. |
|
| Author: | ceej [ Sun Apr 21, 2013 8:03 am ] |
| Post subject: | |
The cam is an Erson 280 off the shelf. No mods. Rockers are RAS AL rollers, 1.6 on the intake, 1.5 on the exhaust. CJ |
|
| Author: | Lobster1 [ Sun Apr 21, 2013 9:54 am ] |
| Post subject: | |
Awesome! Thanks for rubbing it in since I had to work, just kidding. BT |
|
| Author: | Junior [ Thu May 16, 2013 9:25 pm ] |
| Post subject: | |
Quote: The cam is an Erson 280 off the shelf. No mods.
no mods on the motor other than rockers? sounds really nice. what was the ET?
Rockers are RAS AL rollers, 1.6 on the intake, 1.5 on the exhaust. CJ |
|
| Author: | Fopar [ Thu May 16, 2013 9:36 pm ] |
| Post subject: | |
JR I can assure you it is NOT stock motor  Ceej will maybe fill in the details on the motor.   Richard |
|
| Author: | ceej [ Fri May 17, 2013 6:31 am ] |
| Post subject: | |
No mods to the aftermarket cam. It's in the Engine Build Matrix. There isn't a stock part in the engine or transmission that I can think of. Oh, wait, the flex plate!  CJ |
|
| Author: | DadTruck [ Sun May 19, 2013 5:13 am ] |
| Post subject: | |
| that is what fun sounds like...
|
|
| Author: | Junior [ Sun May 19, 2013 7:58 pm ] |
| Post subject: | |
lol, ok. looks like it pulls pretty good. |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|