| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Carburetor Adapters https://www.slantsix.org/forum/viewtopic.php?t=52045 |
Page 1 of 1 |
| Author: | jhdeval [ Sun May 12, 2013 6:53 am ] |
| Post subject: | Carburetor Adapters |
So I was reading Mopar Muscle this morning and saw Atomic EFI it only comes in a 4 barrel model though. I found this http://www.summitracing.com/parts/trd-2065/media/images though. My question is has anyone used one of these adapters? Is there any reason not to use one? I have done a fair amount of work on my engine with larger valves, shaved the deck and head, ported the intake and exhaust. Could I see any benefit to putting a 4 barrel on even with my 2 barrel intake? |
|
| Author: | DusterIdiot [ Sun May 12, 2013 8:27 am ] |
| Post subject: | No... |
The adaptor will choke the airflow/path of the 4 barrel trying to pass through the 2 barrel hole. I would recommend the 4 barrel intake for a 4 or large 2 barrel, a super six intake is for a BBD/2280/Weber or 2300/Autolite if fitted right. -D.idiot |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|