Slant Six Forum
https://www.slantsix.org/forum/

What did I get? e-Distributor
https://www.slantsix.org/forum/viewtopic.php?t=52351		 Page 1 of 1
Author:  Eatkinson [ Wed Jun 12, 2013 6:02 pm ]
Post subject:  What did I get? e-Distributor
So I found an eBay auction for an electronic distributor and supposedly ordered D.Idiot's recommendation: 1st choice: 1977-1980 super six PN:3874876 .

Check out what I received below. 1) Nowhere on it is part number 3874876. The tag states 4091902. 2) Even if this is the right distributor, I can't see how it would stay in place, unless it's supposed to be another press-fit with the rubber o-ring as the main anchor. 3) main shaft looks way too long and has no drive gear. More like a flathead screw driver on the end.

Did I just get the wrong part, or does the 3874876 just look different and require some tweaking? Original points distributor is on the left.

Image

Image
Author:  DusterIdiot [ Wed Jun 12, 2013 7:17 pm ]
Post subject:  You got screwed...
That's a V-8 EI distributor and is not compatible with our engine at this time.
The tag would have been stamped 3874876 not 4091902, the part number suggests it about a 1979 (whether the distributor is actually a 4091902 can be up for debate).

Time to get the right one from the vendor, or get a full refund plus return shipping, it's not even close for your application.

-D.Idiot
Author:  DusterIdiot [ Wed Jun 12, 2013 7:32 pm ]
Post subject:  Holy shoot...
http://www.ebay.com/itm/MOPAR-318-225-E ... e6&vxp=mtr

Man, this is why it pays to be a walking parts catalog. The above URL blatantly lists the part number, the tag on the distributor doesn't even match!
And he has it listed for a 318 as well (that gear ain't gonna work!)
The part number corresponds to a 225 distributor for canada only 1 barrel cars, looks like the governor is a 13R so not a desired candidate.

http://www.ebay.com/itm/Slant-Six-Elect ... b2&vxp=mtr

These look nice, too bad he didn't list the tag number for a quick sale and better pricing, if they are 'desireable'.

Let me know how your return goes...hopefully he honors it and doesn't try to goof you out of your dough. :x

-D.idiot
Author:  Eatkinson [ Thu Jun 13, 2013 12:41 am ]
Post subject: 
Thanks D.I. Yes, I'll let you know how it turns out. Any potential issue using my Standard Bluestreak CH-410X distributor cap with the extended tip rotor on this e-Distributor (the right one which I'll get from the seller)?
Author:  DusterIdiot [ Thu Jun 13, 2013 7:14 am ]
Post subject:  Nope..
You shouldn't have a problem with that combination, though I would "wiggle" the shaft and see if it has any give to it. If the shaft/bushings are really worn then the extended tip can contact the cap contacts and well...

-D.Idiot
Author:  Eatkinson [ Thu Jun 20, 2013 9:18 pm ]
Post subject: 
Well, here's what I ended up with. NOT part #:3874876. I honestly don't know exactly what number this distributor is, as there are at least two numbers shown. It says #3874929 on the vacuum pod, and on the tag, but the embossed housing shows #3656886-1. Well, whatever it is, it's in decent shape with no play or wiggle. Any way to tell for sure? What's the best application for this distributor?

Image

Image

Image

Image

Image

Image
Page 1 of 1 All times are UTC-08:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/