Slant Six Forum
https://www.slantsix.org/forum/

Pre-bent fuel lines
https://www.slantsix.org/forum/viewtopic.php?t=53038		 Page 1 of 1
Author:  SpaceFrank [ Mon Aug 12, 2013 9:42 pm ]
Post subject:  Pre-bent fuel lines
I found these pre-bent stainless fuel lines on Summit. Does anyone have experience with them?

http://www.summitracing.com/search/part ... uel%20line

There also two results given with two different part numbers that both match my car, but one of them has no picture. I will try calling them up to see what the difference is, but I figured I'd try here as well.
Author:  64ragtop [ Wed Aug 14, 2013 4:18 pm ]
Post subject: 
Summit's good about cataloging multiple parts whose descriptions read the same. I've found their sales folk can usually track down the differences. Did you call 'em? What did you find out? I'm looking for the same parts.

BC
Author:  Danarchy [ Wed Aug 14, 2013 5:23 pm ]
Post subject: 
I don't care for Summit myself, but I have dealt with InlineTube a few times, always with excellent results.

http://inlinetube.com/Preformed%20Lines ... CAT-01.htm
Author:  Charrlie_S [ Wed Aug 14, 2013 10:09 pm ]
Post subject: 
Looks to me like one set is for a Valiant, and the other is for a Dart. Different wheelbase. Different length lines. Yes/no?
Author:  SpaceFrank [ Tue Sep 24, 2013 9:59 pm ]
Post subject: 
Just as a follow-up, this fuel line is the correct one (YGL6502S):

http://www.summitracing.com/parts/rsd-y ... model/dart

It appears to be the correct length for my 111" wheelbase 1964 Dart. It's fairly straight with just a few bends in the back where it goes to the fuel pickup, so I presume it wouldn't be too hard to trim some off the front to fit an earlier Valiant, etc.

The other line (RGL6402S) has way too many bends, and is definitely too long. It is also listed for B-bodies, so that's probably what it's for. Don't ask me how I know this. :oops:
Page 1 of 1 All times are UTC-08:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/