| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Electronic Ignition https://www.slantsix.org/forum/viewtopic.php?t=5326 |
Page 1 of 1 |
| Author: | cycledog [ Tue Mar 25, 2003 5:17 pm ] |
| Post subject: | Electronic Ignition |
Chrysler no longer has the electronic ignition conversion for the slant. Where do I go from here. Finding a distributor is no problem or the ecu, but which balast resistor do I need and where can I find a wiring diagram to wire it properly? Thanks, C-dog |
|
| Author: | Pierre [ Tue Mar 25, 2003 5:56 pm ] |
| Post subject: | diagram |
On the main page of this site click the articles link, there is a picture of the proper wiring diagrams. The ballast can be bought from your local autoparts store or a junkyard. |
|
| Author: | cycledog [ Tue Mar 25, 2003 7:54 pm ] |
| Post subject: | |
Pierre, Thanks, I am such a dork.....I knew that. Hello Mcfly......... |
|
| Author: | Pierre [ Tue Mar 25, 2003 8:21 pm ] |
| Post subject: | while we are on the subject... |
Does anyone know what kind of ignition was in a 87 dodge ram /6 truck? Is it the same electronic ignition as in the 73+ cars, the same parts? |
|
| Author: | '74 Sport [ Tue Mar 25, 2003 10:48 pm ] |
| Post subject: | Should I consider a new ignition system? |
Both the electronic ignition control and the voltage regulator on my '74 Dart Sport had some kind of sticky goo running down the inner fender. Should I replace them with similar components and hook everything back the same way, or should I consider going with some currently available ignition system? Any recommendations on which one? |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|