Slant Six Forum
https://www.slantsix.org/forum/

Cam, Rocker and Exhaust questions
https://www.slantsix.org/forum/viewtopic.php?t=5433		 Page 1 of 1
Author:  ceej [ Wed Apr 09, 2003 12:41 pm ]
Post subject:  Cam, Rocker and Exhaust questions
I've been looking at different cams lately, and found that a lot of the parts sources I have list the same cam for the car and the truck engine.

:arrow: Is the increased lift due to using the 1.6 rocker arms only?

:arrow: Can I retro-fit my rocker shafts with the higher ratio rockers, or would I need to make other changes?

I've got a 1bbl 74 Valiant, that my Brother and I are converting to the GM Batch fuel injection. (For background)

:arrow: I'd like to get a header that will fit my High Starter 225. What single piece headers would work on this car? No A/C

I'm toying with building my own intake runner/air box to optimize for the MAF, and Midrange. :shock: Who knows how that will work out...

CJ
Author:  topferment [ Wed Apr 09, 2003 7:54 pm ]
Post subject:  Headers
Clifford sells headers for both high and low starter 225's. Check out their web site at cliffordperformance.com.
Page 1 of 1 All times are UTC-08:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/