| Slant Six Forum https://www.slantsix.org/forum/ |
|
| torque specs needed asap! https://www.slantsix.org/forum/viewtopic.php?t=5470 |
Page 1 of 1 |
| Author: | Andy's GT [ Sat Apr 12, 2003 2:01 pm ] |
| Post subject: | torque specs needed asap! |
were putting it back together now, need torque specs for 67 dart gt 225 /6 we pulled the head, so need specs for everything from there on up thanks! |
|
| Author: | AutoTrans [ Sat Apr 12, 2003 2:11 pm ] |
| Post subject: | |
Here's what I got from a 1970 Mitchell Manual, so this is for a '70 225. Head-65 ft lbs Exhaust manifold-10 ft lbs Intake to exhaust manifold-240 inch lbs Oil pan-200 inch lbs Main bearing cap-85 ft lbs Rear main seal retainer-30 ft lbs Rod cap-45 ft lbs Cam sprocket-35 ft lbs Rocker shaft support bracket-25 ft lbs Valve cover-40 inch lbs Oil pump cover-95 inch lbs Engine front cover-200 inch lbs Oil pump attaching bolt-200 inch lbs Water pump-30 ft lbs Oil filter stud-10 ft lbs May be a bit of overkill, but oh well. |
|
| Author: | Andy's GT [ Sat Apr 12, 2003 9:45 pm ] |
| Post subject: | |
Thank you very much!! We ordered a manual for it but it hasn't come yet! It's together and running...but needs a little fine tuning yet. |
|
| Author: | AutoTrans [ Sat Apr 12, 2003 10:17 pm ] |
| Post subject: | |
Glad to help, eh. |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|