| Slant Six Forum https://www.slantsix.org/forum/ |
|
| NHRA/IHRA/Local tracks firewall rules https://www.slantsix.org/forum/viewtopic.php?t=55202 |
Page 1 of 1 |
| Author: | Greg Ondayko [ Sat Apr 26, 2014 9:52 am ] |
| Post subject: | NHRA/IHRA/Local tracks firewall rules |
i am finally getting everything buttoned up on ruster after a wintr of disassembly and fabricating to make new parts fit. I have a few holes in the firewall that I route the wires through, but the holes are much larger than the wires passing thorough. do I need some kind of covering for the empty space or can I get away with the fan motor hole and the wiring bulkhead hole being uncovered? thanks, Greg |
|
| Author: | GTS225 [ Sat Apr 26, 2014 10:43 am ] |
| Post subject: | |
Sorry, no. You gotta plug 'em. I might suggest just a patch panel of aluminum, screwed over the hole(s), with some appropriate sealant, with a grommet through it for wiring protection. Roger |
|
| Author: | Old6rodder [ Sat Apr 26, 2014 11:37 am ] |
| Post subject: | |
Ditto. |
|
| Author: | slantzilla [ Sat Apr 26, 2014 1:31 pm ] |
| Post subject: | |
For the smaller wiring holes NAPA usually has a plastic boxed assortment of nice grommets that will help. |
|
| Author: | Greg Ondayko [ Sat Apr 26, 2014 3:19 pm ] |
| Post subject: | |
thanks guys. Much appreciated Greg |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|