Anyone recognize these headers? They are 6 into 1 and believe they are Hookers with a measured 3 inch collector. I thought I read someplace the early Hookers had a 3 inch collector while the later 6 into 1's had a 2 and 1/2 inch collector. So, best guess, do they fit early 63-66 A's? I would think they'd fit the 67-76 chassis no problem. Or are they maybe for a truck?

_________________
65 Dart station wagon slant 6 - now under construction
47 Dodge Custom 4 Door sedan
87 D100 Short Bed slant 6

Retired USAF 1966-1986
Retired US Postal Service 2004-2014

Is there a 4 digit number stamped on the flanges anywhere?
I doubt they fit an early A-body. Definitely not a M/T one.

Rick

_________________
2 Mopars come with Spark plug tubes. One is a world class, racing machine. The other is a 426 CI. boat anchor!

12.70 @ 104.6

Don't most of the truck headers have the pipes collect towards the center and then slope towards the back?

Or collect at the center and go straight down - my 1982 W150 needs those as it has a huge geared starter mounted in the low position. I love these Hooker headers with the manifold heat but they are $650 - don't have that kind of cash.

_________________
Tom
'86 Alfa Romeo Spider, red "Dinsdale"
'10 Corvette, red "" (no name yet)
'95 Ferrari 348, red "Zoom"
'04 Maserati, black "Evil"
'05 Aston Martin DB9, green "Bond, Treasury bond."
'82 Dodge W150 Power Ram, yellow "E. Valdez"

Yes to a number on the flange - it's 9471 plus the flanges are no where 1/2 in thick - probably 3/8th with some kind of spacer welded where needed to the flange in order to bolt to the block. Maybe that number will show up if someone has an old Hooker (or whoever made them) parts book.

_________________
65 Dart station wagon slant 6 - now under construction
47 Dodge Custom 4 Door sedan
87 D100 Short Bed slant 6

Retired USAF 1966-1986
Retired US Postal Service 2004-2014

I pulled a very rusty set from a 71 Valiant that looked just like those.

On another thread here they were thought to be 6X1 JR/Mopar Perf headers that require some banging to fit early A. http://www.slantsix.org/forum/viewtopic ... de770ae75e

If you end up selling let me know, they will fit my 67 barracuda.