Hey folks,

Well, Cycledog did some boneyard searching and found that an '88 5th ave 318 "straight out" waterneck fits the Slant essentially perfectly. This should be found on '80s-'90s SB Mopars, and only needs the bolt holes drilled slightly. They use the same gasket as the Slant and the same thermostat type. Thanks C-dog!

<BR><IMG SRC=http://images.prosperpoint.com/518/26910-153.jpg WIDTH=275 HEIGHT=240>[/img][/list]

These are listed new at Rockauto.com for $6, and I verified that the part numbers for gasket and thermostat are the same as the Slant Six. I will be putting one of these on my '64 Dart soon.

Cheers,

Lou

_________________
Home of Slant6-powered fun machines since 1988

Wow, that's pretty cool Lou. I'll have to pick up one (or two) of these next time I'm at the boneyard.

_________________
"Ja, Ich fahre ein altes auto."
'78 Volare 225
'67 Charger 318

Cycledog is the one to thank.

This is only good for non-OEM radiator setups like the aluminum one I have on my '64.

Cheers,

Lou

_________________
Home of Slant6-powered fun machines since 1988