Slant Six Forum
https://www.slantsix.org/forum/

Precision International-Big Bore Gasket Source 3-26-15
https://www.slantsix.org/forum/viewtopic.php?t=57368		 Page 1 of 1
Author:  Greg Ondayko [ Thu Mar 26, 2015 3:13 pm ]
Post subject:  Precision International-Big Bore Gasket Source 3-26-15
3-26-15

Hi Guys,

I Just ordered 4 Of the GSAP210E Big Bore Aussie Head Gaskets
From Precision International
I expected them to take 3 or 4 weeeks to arrive.. as they were coming from the Big Island...

I Ordered Saturday 3/21/15 11:30 EST.

They were on my doorstep Wed Afternoon! 3/25/15 Before 3:00PM EST
That was quicker then My domestic orders from Rockauto, Summit racing Etc.!

Also With The Exchange rate USD to AUD right Now, its not a bad deal!
$150.08 AUD with Shipping.

That is $118.63 USD and $3.56 For international Card Fee.

So for a total of $122.19 USD I had my 4 Aussie Big Bore / Endurotec/Permaseal Gaskets.


So I am all in for $30.54 USD per gasket.

Image


Greg
Author:  Rick Covalt [ Thu Mar 26, 2015 3:27 pm ]
Post subject: 
That is a good price. I wouldn't have minded getting a couple too. Although I probably should check and see how many I already have!

Rick
Author:  Old6rodder [ Thu Mar 26, 2015 7:53 pm ]
Post subject: 
I've ordered a couple clutch sets from an OZ company (Hemi Performance) in the last couple years as well, and both times the shipping speed was impressive. In addition, the parts quality's been excellent.
Author:  Dart270 [ Fri Mar 27, 2015 5:00 am ]
Post subject: 
Precision Int'l is where I got my last Endurotec gaskets. I bought the "head set" with int/exh, VC, and other gaskets included. It was only about AU$10 more than the head gasket by itself.

Thanks for the info, Greg.

Lou
Author:  Greg Ondayko [ Fri Mar 27, 2015 5:37 am ]
Post subject: 
Quote:
I've ordered a couple clutch sets from an OZ company (Hemi Performance) in the last couple years as well, and both times the shipping speed was impressive. In addition, the parts quality's been excellent.

Good to know Dick, If you didnt already, can you post the Part # / Link for those parts?


Greg
Author:  Greg Ondayko [ Fri Mar 27, 2015 5:38 am ]
Post subject: 
Quote:
Precision Int'l is where I got my last Endurotec gaskets. I bought the "head set" with int/exh, VC, and other gaskets included. It was only about AU$10 more than the head gasket by itself.

Thanks for the info, Greg.

Lou
Cool.

I have so many v/c and Valve stem gaskets I was think of using them as Christmas tree ornaments next year... So I just bought the Head only. :D


Greg
Author:  GTS225 [ Fri Mar 27, 2015 11:18 am ]
Post subject: 
I wonder if a group buy could be put together, and what kind of discount might be offered for multiple quantities?

Roger
Author:  Polara1974 [ Fri Mar 27, 2015 1:27 pm ]
Post subject: 
Hi! How BIG is an Aussie big bore head gasket? is it a MLS? Can you get it with different thicknes??

Thanks!
Author:  Rick Covalt [ Fri Mar 27, 2015 3:23 pm ]
Post subject: 
Big bore is 3.65 or 3.66 if I remember correctly. It is not MLS.

Rick
Author:  Greg Ondayko [ Fri Mar 27, 2015 4:05 pm ]
Post subject: 
Quote:
Hi! How BIG is an Aussie big bore head gasket? is it a MLS? Can you get it with different thicknes??

Thanks!
One thickness. . Compressed at about 0.035"
Greg
Author:  Dart270 [ Sat Mar 28, 2015 12:44 am ]
Post subject: 
I got 0.046" compressed thickness last time I measured.

Lou
Author:  Polara1974 [ Sat Mar 28, 2015 5:30 am ]
Post subject: 
Thnaks for your answers! 3,65in bore is big enogh for me!!! Too bad it's not a MLS ... and about compressed tickness there is a big difference between 0,046 to 0,035 ... I'll have to ask

Is there a MLS big bore gasket available somewhere of the shelf?? How about Cometic ... I need a MLS gasket for bore bigger than 90mm (3,55) ...

Thanks!
Author:  Rick Covalt [ Sat Mar 28, 2015 7:16 am ]
Post subject: 
Cometics is a no go. I just checked a few months ago and they would run about $330-$350 each and I can't remember off hand if there was a minimum order of 20.

My son is working with another manufacture to see if he can get a MLS head gasket done that would be considerably less $$ than the Cometics. He needs one for his race car also. Stand by .

Rick
Page 1 of 1 All times are UTC-07:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/