| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Radiators ?? https://www.slantsix.org/forum/viewtopic.php?t=5834 |
Page 1 of 1 |
| Author: | Guest [ Sat May 24, 2003 6:12 pm ] |
| Post subject: | Radiators ?? |
This is my first post here. I have a 66 Dart with stock 6. I have an aluminum radiator from a 740 volvo turbo with auto trans. It measures 18 x 16 1/2 x 1 1/4. Could I use this in place of my stock radiator? Is there a way to size a radiator for a particular application? I may be going to a turbo later and have the intercooler from the volvo to. |
|
| Author: | slanted attitude [ Sat May 24, 2003 7:36 pm ] |
| Post subject: | |
Welcome to the board. As far as using a Volvo rad., if it physically fits and the inlet/outlet is in the correct or close position I dont see why not ,as I always say use what you got. Slanters are tinkerers and adapters and we tend to adapt alot unusual stuff anyway.Good luck with your project. |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|