| Slant Six Forum https://www.slantsix.org/forum/ |
|
| oil pan gasket seal??? https://www.slantsix.org/forum/viewtopic.php?t=6025 |
Page 1 of 1 |
| Author: | slanted steve [ Mon Jun 16, 2003 10:17 pm ] |
| Post subject: | oil pan gasket seal??? |
i have leaking from the oil pan gasket. i have hammered the pan itself flat and used blue goo. doesn't anyone make a one piece gasket?? any sealing tips?? the unfortunate thing is that you don't know whether it seals till after it is all back together!!! |
|
| Author: | DusterIdiot [ Mon Jun 16, 2003 10:37 pm ] |
| Post subject: | Anaerobic goo.... |
Haven't seen a one piece gasket. A friend gave me a tube of GM Good Wrench 'gasket sealer'. I like it, my friend says he uses it on his oil pan since it stays gooey and doesn't setup like RTV. We used the standard gasket, then filled that stuff in the cracks and 'joints'. I haven't had a leak out of my pan for 13,000 miles so far. Who knows what your local GM dealer would sell the stuff for, there has to be another more 'commercial goo' like it... -D.Idiot |
|
| Author: | Pierre [ Tue Jun 17, 2003 2:34 am ] |
| Post subject: | |
Docs article (in the articles link off of the main page) gives some helpful hints about oil pan sealing. http://www.slantsix.org/articles/gasket ... n-seal.htm |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|