| Slant Six Forum https://www.slantsix.org/forum/ |
|
| 4-spd od in60 Val,anyone ever done this? https://www.slantsix.org/forum/viewtopic.php?t=6097 |
Page 1 of 1 |
| Author: | slanted attitude [ Wed Jun 25, 2003 6:31 pm ] |
| Post subject: | 4-spd od in60 Val,anyone ever done this? |
I just scored a 75-76 4spd od out of an a-body with bellhousing and rear cross member and was wondering if anyone had ever put one in a early a-body and wahat troubles you encounterd.I realize that the floor and hump will need modifcation and thats not a real problem but im more concerned with the crossmember as the e-brake attaches to it and the pivot ball is missing from the bell and it looks like i will have to fab a bracket to mount it in correct location.As always any advice from a more knowledgable slanter is appreciated. Mark |
|
| Author: | mightyss [ Sat Jun 28, 2003 4:54 am ] |
| Post subject: | 4 spd |
i put a 4 spd od into a 65 cuda(3spd slant car). yes the hump needs modified(5 pd hammer will do in a pinch). |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|