You can use the early small pilot crank with a late trans if you get a converter made with a small snout on it.
http://www.slantsix.org/articles/hrm-sl ... ov-pg2.jpg
| Slant Six Forum https://www.slantsix.org/forum/ |
|
| pre-67 transmission and crank https://www.slantsix.org/forum/viewtopic.php?t=6099 |
Page 1 of 1 |
| Author: | Slantosis [ Wed Jun 25, 2003 7:12 pm ] |
| Post subject: | pre-67 transmission and crank |
I'm confused about the compatibility of a pre/post 67 slant transmissions, with a 66 225. The slant that I'm building is a 66 block with a 66 crank so I would need to use a 66 or older tranny right? What is the reason for this? |
|
| Author: | v8440 [ Wed Jun 25, 2003 8:54 pm ] |
| Post subject: | |
I think you can use the '67 transmission-it's the '68 and newer cranks that had a bigger pilot hole in them for the torque converter hub or pilot bearing. |
|
| Author: | slantzilla [ Thu Jun 26, 2003 8:57 pm ] |
| Post subject: | |
You can use the early small pilot crank with a late trans if you get a converter made with a small snout on it. http://www.slantsix.org/articles/hrm-sl ... ov-pg2.jpg |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|
