| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Super 6 motors https://www.slantsix.org/forum/viewtopic.php?t=62801 |
Page 1 of 1 |
| Author: | Crizila [ Wed Sep 05, 2018 7:34 am ] |
| Post subject: | Super 6 motors |
Besides the intake system ( 2 brl manifold and carb ) were there any other differences over the regular 1 brl 225 motor? - cam, CR, heads, valve train, exhaust system, etc. Thanks, John |
|
| Author: | gdizzle [ Wed Sep 05, 2018 7:59 am ] |
| Post subject: | Re: Super 6 motors |
I believe, the exhaust manifold is different, the carb is a 2bbl, the gas pedal and linkages need to be swapped out, the air cleaner needs to be swapped, and the exhaust is supposed to be upsized to 2.25. also a cool blue sticker on the air cleaner that says SUPER SIX |
|
| Author: | and739 [ Wed Sep 05, 2018 11:41 am ] |
| Post subject: | Re: Super 6 motors |
Here's a link to the Super Six article over on the Articles page: http://slantsix.org/articles/supersix/article.htm I found this information most helpful during my search for and installation of a Super Six. |
|
| Author: | Badvert65 [ Wed Sep 05, 2018 1:07 pm ] |
| Post subject: | Re: Super 6 motors |
Well, I had an original 79 Volare Wagon with the factory Super Six. The exhaust manifold on that was no different than any other slant six out there. jus' sayin' |
|
| Author: | coconuteater64 [ Thu Sep 06, 2018 4:14 pm ] |
| Post subject: | Re: Super 6 motors |
Quote: Well, I had an original 79 Volare Wagon with the factory Super Six. The exhaust manifold on that was no different than any other slant six out there.
Same thing as I discovered.
jus' sayin' |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|