| Slant Six Forum https://www.slantsix.org/forum/ |
|
| cam lifters https://www.slantsix.org/forum/viewtopic.php?t=62851 |
Page 1 of 1 |
| Author: | terrylittlejohn [ Thu Sep 20, 2018 6:57 am ] |
| Post subject: | cam lifters |
just got the new cam and lifters for the blower motor, the comp lifters are the straight style not the dumbbell style. are there any oiling flow problems with this style lifter? |
|
| Author: | slantzilla [ Sun Sep 23, 2018 4:16 pm ] |
| Post subject: | Re: cam lifters |
Not that I have ever seen. Slants have been getting small block lifters for years. Not even sure you can get dumbbells anymore. |
|
| Author: | emsvitil [ Sun Sep 23, 2018 4:32 pm ] |
| Post subject: | Re: cam lifters |
Rockauto has them. MELLING JB2084 ENGINETECH MT2084 SEALED POWER AT2084 |
|
| Author: | terrylittlejohn [ Mon Sep 24, 2018 6:06 am ] |
| Post subject: | Re: cam lifters |
thanks, I have order a few cams over the years but it has been awhile since my last one. this is the first time I haven`t use the dumbbell style. the cam is 274degs@ 0.050" with .590" lift and 114degs lobe separation. hoping this will work better with the blown engine. |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|