Lets see, isn't this the floorshift bellhousing that leans the tranny to the left? I may have one of those.
DD
| Slant Six Forum https://www.slantsix.org/forum/ |
|
| advice on repair vs replace https://www.slantsix.org/forum/viewtopic.php?t=6320 |
Page 1 of 1 |
| Author: | dukecityradical [ Fri Jul 18, 2003 3:51 pm ] |
| Post subject: | advice on repair vs replace |
Hey folks -- I've got a 1961 Valiant with a 3 spd manual on the floor. The shift linkage is mechanical. A couple of days ago, the pivot point for the shift fork snapped where the clutch fork clips onto it (not a ball pivot point, looks more like a soccer goal with the crossmember broken off.) I found the piece that broke off when I removed the inspection plate at the bottom of the tranny. I'm wondering if it would be better to try to get the pivot welded back together, or try to get a new bellhousing? My concern with getting a new one is that they may be pretty rare for the mechanical linkage, or possibly the floor mount. Does anyone have any advice and/or contacts for a bellhousing? Thanks... |
|
| Author: | Doc [ Fri Jul 18, 2003 4:59 pm ] |
| Post subject: | |
Lets see, isn't this the floorshift bellhousing that leans the tranny to the left? I may have one of those. DD |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|