| Slant Six Forum https://www.slantsix.org/forum/ |
|
| which carb 2 barrel for turbo project with intercooler ? https://www.slantsix.org/forum/viewtopic.php?t=64018 |
Page 1 of 1 |
| Author: | scratchi [ Sun Sep 01, 2019 1:48 am ] |
| Post subject: | which carb 2 barrel for turbo project with intercooler ? |
which carb 2 barrel for turbo project with intercooler ? someone tell me that if i use my weber 32/36 with a intercooler , i will have problem of fuel that beads with cold air. |
|
| Author: | Joshie225 [ Sun Sep 01, 2019 4:13 pm ] |
| Post subject: | Re: which carb 2 barrel for turbo project with intercooler ? |
A Weber 32/36 doesn't flow enough air for a naturally aspirated 225 and it won't flow enough fuel for a turbocharged one. Don't worry about fuel vaporization. Even with intercooling the intake charge is still well above ambient temperature. If you're determined to use a 2bbl I would use a 350 CFM Holley with a solid float and lots of other mods. |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|