Slant Six Forum
https://www.slantsix.org/forum/

need a torque convertor
https://www.slantsix.org/forum/viewtopic.php?t=6452		 Page 1 of 1
Author:  brianzdart [ Tue Aug 05, 2003 6:58 pm ]
Post subject:  need a torque convertor
:shock: <- that was me when I figured out my problem. My torque convertor is letting go..... my rear gear is fine, but when I hit the gas hard @ low speed the driveline is "catching" and bucking. Now the 2-1 d/shift is opening up and slipping when my engine applies torque, and she gives one hell of a "thunk" (catching) into 1st or R from N. My tranny shifts fine but sometimes i feel a clunk when revs go down/up during a shift.

So here's the rub; I started Auto Technician (ASE cert) classes here at PTEC in St Pete yesterday and I make almost nothing at the restaurant, so I am a "poor student". I need someone to take pity on me and sell me a cheap, _good_ torque convertor for my '75 Dart SE /6-904-7 1/4. Does anyone have one around? My 66k-mile baby needs your help! local would be good so shipping is nil.....

-Brian

Florida, 727 504 4941
brianzdart@hotmail.com
Author:  Jopapa [ Tue Aug 05, 2003 7:14 pm ]
Post subject: 
I'm not sure, but I THINK you can have one "rebuilt" cheaper than buying a new/used one. You may want to check the local transmission shops and find out. Wish I could be more help then that :?
Author:  moose340 [ Tue Aug 05, 2003 8:06 pm ]
Post subject:  Torque Converter
Well i have a rebuild one never used. But if you want to pay shipping let me know. I can get a cheaper price sending to business thru UPS.

Let me know if you want it.
Author:  Doctor Dodge [ Tue Aug 05, 2003 9:54 pm ]
Post subject: 
I have a pile of good used ones but shipping would cost bucks. :cry:
There has to be someone in your area with one...cheap.
DD
Author:  Charrlie_S [ Thu Aug 07, 2003 5:55 am ]
Post subject: 
Brian, I live outside Ocala. If you want to drive up, I can help you out with a converter. To bad you didn't post ealier. I just picked up a complete slant, 904, 7 1/4 drive train, on Sunday, in Tampa. You could hve got the converter then. Let me know, and we can arrange a time.
Page 1 of 1 All times are UTC-08:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/