| Slant Six Forum https://www.slantsix.org/forum/ |
|
| '61 Dodge Seneca UPDATE https://www.slantsix.org/forum/viewtopic.php?t=64674 |
Page 1 of 1 |
| Author: | Dart270 [ Thu Apr 02, 2020 3:47 am ] |
| Post subject: | Re: '61 Dodge Seneca UPDATE |
Very cool - congrats! Lou |
|
| Author: | Greg Ondayko [ Thu Apr 02, 2020 5:05 am ] |
| Post subject: | Re: '61 Dodge Seneca UPDATE |
Nice, What door Panels are in that aspen? is it a 2 or 4 door? Greg |
|
| Author: | oldwood [ Thu Apr 02, 2020 7:47 am ] |
| Post subject: | Re: '61 Dodge Seneca UPDATE |
Its a 4dr Aspen |
|
| Author: | Greg Ondayko [ Thu Apr 02, 2020 10:00 am ] |
| Post subject: | Re: '61 Dodge Seneca UPDATE |
will that car be parted? Greg |
|
| Author: | coconuteater64 [ Fri Apr 03, 2020 12:19 pm ] |
| Post subject: | Re: '61 Dodge Seneca UPDATE |
That's a neat car! My grandfather had a Seneca back in the day. He drove it until the battery rusted through the tray and the suspension rotted off. A Super Six ought to put a little bit more motivation into it. |
|
| Author: | DadTruck [ Fri Apr 03, 2020 4:09 pm ] |
| Post subject: | Re: '61 Dodge Seneca UPDATE |
agree, today a '61 Seneca is a cool car,,,, however, think for a moment, and set your self in 1961 as a new Car Salesman, with a wife, a kid, maybe a mortgage,, and you needed to sell those to get a paycheck,, |
|
| Author: | oldwood [ Fri Apr 03, 2020 6:23 pm ] |
| Post subject: | Re: '61 Dodge Seneca UPDATE |
Any chance of finding a good original 1 bbl carb??? The tag # is 3099S |
|
| Author: | oldwood [ Sat Apr 04, 2020 10:26 am ] |
| Post subject: | Re: '61 Dodge Seneca UPDATE |
Quote: agree, today a '61 Seneca is a cool car,,,,
The slant 6 was dominating the race scenes and if you anted up and checked the box you could take your share of wins at the drag strip with a cross ram and pull your car with one of the most unique wagons Dodge ever made. A good salesman can sell ice to an Eskimo.
however, think for a moment, and set your self in 1961 as a new Car Salesman, with a wife, a kid, maybe a mortgage,, and you needed to sell those to get a paycheck,, |
|
| Author: | oldwood [ Sat Apr 04, 2020 4:07 pm ] |
| Post subject: | Re: '61 Dodge Seneca UPDATE |
I met a guy thats converting his running '61 /6 to a V-8 car. He's shipping his carb to me. Yea!!! |
|
| Author: | plymouthcranbrook [ Sat Apr 11, 2020 5:53 pm ] |
| Post subject: | Re: '61 Dodge Seneca UPDATE |
When I was a young lad my Father had a 1960 Dodge Seneca with the 225 and a three speed manual. Good car, he killed it like all the rest he had but I helped cause I was 16-17 and drove just like you would expect. Found out it would do 98 MPH. Good luck with yours . Comfortable car. |
|
| Author: | oldwood [ Mon Apr 13, 2020 2:35 pm ] | ||||
| Post subject: | Re: '61 Dodge Seneca UPDATE | ||||
I pulled the rocker arm assy. and have it soaking. I found out today while scraping the pounds of mud to find the engine and trans. and I discovered the motor had been swapped out for a rebuild in '74-'75. 10/10 with 30 over. The farmer never heard of a car wash. lol 1 rocker foot needs a little grind or are most people replacing the rocker??? The oil pump wasn't even visible. Should I remove and clean it or just take out the relief valve??? Which hole should I force air through to clean valve trane oil passages in the head???
|
|||||
| Author: | oldwood [ Mon Apr 13, 2020 3:54 pm ] |
| Post subject: | Re: '61 Dodge Seneca UPDATE |
i'm just trying to get it up and running and its uglier than any old Corona. In fact,it just might scare the Corona to death. |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|