| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Super Six exhaust manifold Q https://www.slantsix.org/forum/viewtopic.php?t=64717 |
Page 1 of 1 |
| Author: | Rob Simmons [ Wed Apr 08, 2020 8:34 am ] |
| Post subject: | Super Six exhaust manifold Q |
Doesn’t the Super Six exhaust manifold have a slightly larger outlet than others? Everything else is the same, right? I need to sort through some things and need to know what I’m looking for... I got the article to open finally...  Disregard.... got my answers.... 
|
|
| Author: | volaredon [ Wed Apr 08, 2020 8:39 am ] |
| Post subject: | Re: Super Six exhaust manifold Q |
Yeah I read somewhere that it is, either 2-1/8 or 2-1/4 where the regular one is something like 1-7/8 ish. But who's to say that the stack you have, is still as was assembled together from day 1? Easily could have been swapped around over the years |
|
| Author: | Reed [ Wed Apr 08, 2020 8:44 am ] |
| Post subject: | Re: Super Six exhaust manifold Q |
No difference in the exhaust manifold on the Super Six vs. one barrel. Exhaust PIPE diameter was different, not the exhaust manifold diameter. |
|
| Author: | SlantSixDan [ Wed Apr 08, 2020 10:10 am ] |
| Post subject: | Re: Super Six exhaust manifold Q |
Reed's correct. There is nothing such as a "Super Six exhaust manifold". |
|
| Author: | Badvert65 [ Wed Apr 08, 2020 2:47 pm ] |
| Post subject: | Re: Super Six exhaust manifold Q |
I was the second owner of a 79 Volare wagon with the Super Six. Was a low mileage car and I believe it had the original exhaust. It had the same exhaust manifold as any other slant and the head pipe was no bigger either (about 2 inch). I ground my manifold out to 2 1/4" and had a 2/14 head pipe made up. It ran much better, not a rocket, but better. |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|