| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Super-Easy Request https://www.slantsix.org/forum/viewtopic.php?t=6481 |
Page 1 of 1 |
| Author: | DanInNy [ Thu Aug 07, 2003 4:01 pm ] |
| Post subject: | Super-Easy Request |
Third forum for this question; the first 2 yielded no answers! I just need someone with a 170 to measure the dipstick and the tube for me. I think mine is too long. |
|
| Author: | Doc [ Thu Aug 07, 2003 4:11 pm ] |
| Post subject: | Re: Super-Easy Request |
Quote: Third forum for this question; the first 2 yielded no answers!
This is a issue of having the correct dipstick for the tube, not the correct tube / dipstick for the 170 engine.I just need someone with a 170 to measure the dipstick and the tube for me. I think mine is too long. So...with that in mind, do you have the short (60-67), medium (68-76) or long dipstick tube? Shoot us a measurement on the tube and we can measure the matching dipstick. DD |
|
| Author: | relic-lover [ Thu Aug 07, 2003 4:39 pm ] |
| Post subject: | 170 dipstick tube |
My 1961 valiant 170 has a medium length tube setup. The top of the tube to the block measures 8 7/8" the dipstick from the tip to the stop (where it rests on the tube) measures 17 5/8 " The dipstick from the full line to the stop measures 15 5/8" |
|
| Author: | Charrlie_S [ Thu Aug 07, 2003 4:44 pm ] |
| Post subject: | |
My 1966, and older 170 engines have. Tube: top of tube to block 2 5/8 inches Stick:Stop on stick, at top of tube, to full mark, 10 5/8 inches Full mark to add mark; 9 /16 inch Stop on stick to tip of stick 12 13/16 inch |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|