| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Pulley interchange/question https://www.slantsix.org/forum/viewtopic.php?t=65265 |
Page 1 of 1 |
| Author: | 74TXDuster [ Thu Aug 27, 2020 4:02 pm ] |
| Post subject: | Pulley interchange/question |
Ok y’all, doing the late 70’s AC bracket swap. Moving along, until I found out the two groove pulley doesn’t fit with the later style configuration. Did the later AC’s just use the single groove pulley? If so, do all slant pulleys interchange? |
|
| Author: | SlantSixDan [ Thu Aug 27, 2020 5:06 pm ] |
| Post subject: | Re: Pulley interchange/question |
What two-groove pulley, later configuration of what, which slant pulleys? Crank pulley Water pump/fan pulley Alternator pulley A/C compressor pulley ...? |
|
| Author: | 74TXDuster [ Fri Aug 28, 2020 7:38 am ] |
| Post subject: | Re: Pulley interchange/question |
The ac cars use a two groove wp pulley, and I made the swap over to the late 70’s AC mounting and didn’t realize , the wp pulley is different . Wanting to know if the single groove’s interchange from year to year? Anyone perhaps has done this swap and can confirm this is what I need. My pulley interferes with the idler. |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|