| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Can a clutch type fan be fit/ retrofit to a 60-62 Lancer / valiant? https://www.slantsix.org/forum/viewtopic.php?t=65629 |
Page 1 of 1 |
| Author: | Greg Ondayko [ Thu Dec 10, 2020 3:28 am ] |
| Post subject: | Can a clutch type fan be fit/ retrofit to a 60-62 Lancer / valiant? |
Cleaning out my parts storage.. Ran across lots of fans.. Was wondering if there is enough space to fit a clutch fan into a 60-62 a body with stock rad etc? Thanks, Greg |
|
| Author: | Rick Covalt [ Thu Dec 10, 2020 5:04 am ] |
| Post subject: | Re: Can a clutch type fan be fit/ retrofit to a 60-62 Lancer / valiant? |
I don't think there is room Greg. But not 100% sure |
|
| Author: | Greg Ondayko [ Thu Dec 10, 2020 5:12 am ] |
| Post subject: | Re: Can a clutch type fan be fit/ retrofit to a 60-62 Lancer / valiant? |
that's what I was thinking, but I haven't yet mocked up anything. I have the solid 7 blade OE AC / MAX cooling Slant 6 fans from the 60's- early 70's as well as the standard 4 blade fans... I also have the 5 Blade AC Fan / with clutch from the F bodies... I have on on my 69 dart and it's great! Greg |
|
| Author: | hyper_pak [ Thu Dec 10, 2020 6:51 pm ] |
| Post subject: | Re: Can a clutch type fan be fit/ retrofit to a 60-62 Lancer / valiant? |
Greg, I didn't have ANY extra room on the Lancer. I had to bend the fan plates to keep from hitting the crank bolt. |
|
| Author: | NEVjr [ Thu Dec 10, 2020 7:40 pm ] |
| Post subject: | Re: Can a clutch type fan be fit/ retrofit to a 60-62 Lancer / valiant? |
the beauty of having the motor and car designed together is how well they fit. this also means they only fit as originally equipped |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|