| Slant Six Forum https://www.slantsix.org/forum/ |
|
| need brake drum part number https://www.slantsix.org/forum/viewtopic.php?t=65637 |
Page 1 of 1 |
| Author: | Charrlie_S [ Wed Dec 16, 2020 2:21 pm ] |
| Post subject: | need brake drum part number |
Does anyone have the centric part number for the small bolt pattern 10 x 1/34 rear brake drums? Or any other brand. |
|
| Author: | Greg Ondayko [ Wed Dec 16, 2020 2:59 pm ] |
| Post subject: | Re: need brake drum part number |
Try centric # 123.63044. Seems Rock auto and Summit has them although if you look it up under the car on rock auto it may not show up. Try just the part number. I would also confirm that these the proper 10" x 2 3/4" drums Greg |
|
| Author: | wjajr [ Sat Dec 19, 2020 9:14 am ] |
| Post subject: | Re: need brake drum part number |
I think you will find there are three 10" x 1/3/4 rear drums listed here a little way down the page. My dart had same 10x 1 3/4" rear brake drum with the embossed Century part number 712304. They are probably 30 years old & look to have never been turned. I removed them when I upgraded to four wheel disks and 5 x 4.5" bolt pattern last year. |
|
| Author: | Charrlie_S [ Sat Dec 19, 2020 2:50 pm ] |
| Post subject: | Re: need brake drum part number |
Quote: Try centric #
Sorry, Greg. I didn't see your response. I kept looking different places, and the Centric 123.63044 is the correct part number for the small bolt pattern (5 x 4) 10 x 1 3/4 shoes. I ordered two from Summit, after they confirmed the specs over the phone. I prefer to buy from Summit, rather then Rock Auto. With Summit you have great customer service, that is not available from Rock Auto. Ordered afternoon of 12-16-20 Had them 12-18-20 just after 6:00 pm. Summit price matched Rock Auto at $71.57 for two, delivered.
123.63044. Seems Rock auto and Summit has them although if you look it up under the car on rock auto it may not show up. Try just the part number. I would also confirm that these the proper 10" x 2 3/4" drums Greg |
|
| Author: | Greg Ondayko [ Mon Dec 21, 2020 4:34 am ] |
| Post subject: | Re: need brake drum part number |
Yes I meant 10" x 1 3/4" sbp Drums.. I typed 2 3/4" or some ridiculous number. At this time summit does have it's advantages as you can call and talk to someone. Greg |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|