Slant Six Forum
https://www.slantsix.org/forum/

Shift Kits, which one????
https://www.slantsix.org/forum/viewtopic.php?t=6589		 Page 1 of 1
Author:  87Slant_sickness [ Sat Aug 16, 2003 11:32 pm ]
Post subject:  Shift Kits, which one????
hey all, well i'm sick of trying to mess with a kickdown, i wanna go full manual in my A-904.

I'm just stumped on which one to get.. i really dont wanna dish out 100bux for the Trans-go kit becuase i'm not changing the trans + TC untill next spring now and i need a kit for a lock-up trans.

anyways will any of these do what i want in a 1080 lock-up A-904??

http://store.summitracing.com/partdetai ... TFOD%2D518
http://store.summitracing.com/partdetai ... MM%2D10232


if i'm going in the wrong direction on these kits and if its not too much trouble can you provide a part number + manufacturer of a kit that will turn my lock-up A-904 into a "manu-matic"? ;)

thanks!
Justin
Author:  87Slant_sickness [ Sun Aug 17, 2003 12:07 am ]
Post subject: 
i found this kit on B&M's website and think it may work, heres the part no. BMM10219

its a "manual-pak" kit, this in my 80 A-904 right? Summit wants 96bux for this kit which is great if it'll work in any 727/904 like they claim...

thanks!!!!!
Justin
Author:  87Slant_sickness [ Sun Aug 17, 2003 7:07 pm ]
Post subject: 
:( no one?? i need to know if this Manualpak kit BMM-10219 will work in my 1980 Volare's Lockup A-904 but thursday?????
Author:  moose340 [ Sun Aug 17, 2003 9:38 pm ]
Post subject:  transpak
Well i installed this kit into my 904. Of course i do not have a lockup but the instructions in the kit show you how to identify which trans and how to set it up. i would suggest doing this only in a trans you will be using for a long time since you do have to do some modifications to the valve body.

Overall it took me 3 hours to modify tranny.
Author:  87Slant_sickness [ Mon Aug 18, 2003 4:11 pm ]
Post subject: 
Hey,
I order'd the Manual-pak from B&M part no. 10219 from a local speed shop its 169bux and an extra 25bux to have it here in 2 weeks time and this is without tax :shock:

What kind of modifications did you have to do to the valve body???

Justin
Author:  moose340 [ Mon Aug 18, 2003 8:25 pm ]
Post subject:  transpak
Hey Justin,

I would have ordered it elsewhere. Valve body is modified by putting on templates and drilling a hole. Of course new valves and moving bearings on the inside. You will need the retorque the bands. Remove one spring from piston. I believe that is it but I can't remember its been over a year. :?
Author:  87Slant_sickness [ Tue Aug 19, 2003 6:34 am ]
Post subject: 
hey Moose,

thanks, i know its expensive but i hate kickdown linkages with a passion (i've never used or tinkered with an auto before) and Summit wanted 96bux with a 4week wait, if i converted it to cdn dollars and paid shipping plus customs fee's then it would have came out to around the same...

cant wait for it to arrive :D
Page 1 of 1 All times are UTC-08:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/