| Slant Six Forum https://www.slantsix.org/forum/ |
|
| 1966 Belvedere II 225 Throttle Cable https://www.slantsix.org/forum/viewtopic.php?t=66423 |
Page 1 of 1 |
| Author: | Essentialt21 [ Thu Jan 20, 2022 11:00 pm ] |
| Post subject: | 1966 Belvedere II 225 Throttle Cable |
Hello again all! My throttle cable snapped at the pedal for my 1966 Plymouth Belvedere II 4 door with the 225 slant. Before I start digging into it, does anyone know a size/part#/or location to buy just the factory replacement or equivalent. Not really looking to do any serious modifications with a universal cable unless I am forced to. Thanks again.... |
|
| Author: | Greg Ondayko [ Fri Jan 21, 2022 4:43 am ] |
| Post subject: | Re: 1966 Belvedere II 225 Throttle Cable |
I would look into a cable from a '72-'78 Dodge d or w series truck. I am not sure if they are available aftermarket new or not. For sure used on ebay and in the Junkyards/Swap meets etc. Measure the length of yours and see if the truck cables are the same or similar length.. I bet they can be modified to work. Plenty on somewhat universal options as well out there from Lokar. Greg |
|
| Author: | MadScientistMatt [ Fri Jan 21, 2022 5:47 am ] |
| Post subject: | Re: 1966 Belvedere II 225 Throttle Cable |
If the housing is OK and it's just the inner cable that's broken, check with your local bicycle shop to see if they can make a replacement. |
|
| Author: | Greg Ondayko [ Fri Jan 21, 2022 6:06 am ] |
| Post subject: | Re: 1966 Belvedere II 225 Throttle Cable |
Ooh.. good call Matt! |
|
| Author: | Doctor Dodge [ Fri Jan 21, 2022 5:59 pm ] |
| Post subject: | Re: 1966 Belvedere II 225 Throttle Cable |
Pioneer Industries makes many cables so see if they have something that is close. https://pioneerautoinc.com/all?cat=12 Look at CA-8417 & CA-8418 DD |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|