Hoping someone can recommend a machine shop in Reno/Sparks, NV or within 200 miles or so (Sacramento, CA bay area) that is knowledgeable on the Slant Six (esp. porting the head). Getting ready to build mine over the winter and need to find a shop that will treat my parts right. It will be a 225 w/Molnar rods, 2.2 pistons, Total Seal rings, Dutra Duals, and an Offy intake running dual Webers. Would also like cam recommendations. It's going into a 64 Valiant wagon with automatic transmission. Not sure what the rear gears are but those can be changed. Weekend driver.

Is Romeo Furio still around Vegas?

Yes He is in Boulder City.

He is not active on here I do not believe, but he is on FABO with the usename Darter6.

I have his phone # if anyone is interested.

Greg

_________________
http://www.youtube.com/hyperpack

I was talking with him about (I forget what) back around 15 years ago, used to have his contact info.
And shortly after I was talking to him about whatever it was we were out there and my son bought his ramcharger that he still has and we had some issues with, on the drive cross country with it, before we got far from where it was bought south of Vegas, mostly looking for parts and supplies getting it ready for the long drive back here I think I called him while we were out there

He used Mopar Engines West IIRC.

_________________
Official Cookie and Mater Tormentor.

yes that seems Right. MEW and Richard Nedbal for Romeo's Projects.

Greg

_________________
http://www.youtube.com/hyperpack