| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Main bearings https://www.slantsix.org/forum/viewtopic.php?t=67327 |
Page 1 of 1 |
| Author: | MWfan [ Wed Jul 05, 2023 12:15 pm ] |
| Post subject: | Main bearings |
Cant seem to find any .010 under main bearings for my forged crank slant. Anybody have a source? |
|
| Author: | hyper_pak [ Wed Jul 05, 2023 12:24 pm ] |
| Post subject: | Re: Main bearings |
Rockauto Sealed Power for a 1966 Dodge Dart 225. https://www.rockauto.com/en/catalog/dod ... aring,5220 |
|
| Author: | MWfan [ Wed Jul 05, 2023 2:00 pm ] |
| Post subject: | Re: Main bearings |
Thanks! |
|
| Author: | hyper_pak [ Wed Jul 05, 2023 2:01 pm ] |
| Post subject: | Re: Main bearings |
Your welcome! |
|
| Author: | MWfan [ Wed Jul 12, 2023 1:06 pm ] |
| Post subject: | Re: Main bearings |
Quote: Rockauto
All options for .010 show out of stock.
Sealed Power for a 1966 Dodge Dart 225. https://www.rockauto.com/en/catalog/dod ... aring,5220 |
|
| Author: | Dart270 [ Wed Jul 12, 2023 1:10 pm ] |
| Post subject: | Re: Main bearings |
Try King bearings through Summitracing.com. Lou |
|
| Author: | MWfan [ Wed Jul 12, 2023 1:20 pm ] |
| Post subject: | Re: Main bearings |
The bearings I thought would work came in from O'rielly today and the thrust bearing is way too small for the bearing cap. I am back on the hunt. I have checked with Advance, Auto Zone, Napa, O'rielly, Summit, Jegs, and several small online stores. Nobody has them. Summit says they can get them in late September. King Bearings says they will be making another run in early 2024. King gave me their part# to search. MB407AM010. It took from April until June to get the crank back from the only machine shop in my area that was accepting work. If anyone has a confirmed source for a set of .010 over mains for a 1969 Dodge Dart 225 i would appreciate it. If I was giving anyone advice regarding building an engine right now, I would say if possible, get the engine measured and check parts availability (and try to get them IN HAND) BEFORE machining the engine. Thanks, Bernie |
|
| Author: | hyper_pak [ Wed Jul 12, 2023 2:33 pm ] |
| Post subject: | Re: Main bearings |
Sealed power showed stock when I did the search. Good luck with your search. |
|
| Author: | Charrlie_S [ Wed Jul 12, 2023 2:36 pm ] |
| Post subject: | Re: Main bearings |
I have .010 main bearings on hand. |
|
| Author: | MWfan [ Wed Jul 12, 2023 3:30 pm ] |
| Post subject: | Re: Main bearings |
Quote: I have .010 main bearings on hand.
I would love to buy them. Please PM me.Thanks, Bernie |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|