I think I have some copper gaskets from Mike's stash, but it will be awhile before I'm allowed to travel.
| Slant Six Forum https://www.slantsix.org/forum/ |
|
| 3.50" copper head gasket https://www.slantsix.org/forum/viewtopic.php?t=67360 |
Page 1 of 1 |
| Author: | terrylittlejohn [ Thu Aug 03, 2023 7:26 pm ] |
| Post subject: | 3.50" copper head gasket |
any one have a 3.50"bore copper head gasket they a willing to sell! |
|
| Author: | MadScientistMatt [ Sat Aug 05, 2023 5:50 am ] |
| Post subject: | Re: 3.50" copper head gasket |
I believe Hussey Copper makes them, if you're not able to find one from someone's part stash. |
|
| Author: | terrylittlejohn [ Sat Aug 05, 2023 6:30 am ] |
| Post subject: | Re: 3.50" copper head gasket |
thanks! was looking at summit with sce gaskets but there out to be ordered in September ! |
|
| Author: | Charrlie_S [ Sat Aug 05, 2023 6:38 am ] |
| Post subject: | Re: 3.50" copper head gasket |
I think I have the first copper head gasket Hussey ever made, for a slant. I had to send them a OEM stamped steel gasket for a pattern. Mine is 3.470 bore by .042 thick. Maybe someday I'll use it on my turbo 170. https://husseyperformance.net/ |
|
| Author: | hyper_pak [ Sat Aug 05, 2023 7:13 am ] |
| Post subject: | Re: 3.50" copper head gasket |
sorry I sold my spare. September will be here before you know it. |
|
| Author: | ProCycle [ Sat Aug 05, 2023 7:22 am ] |
| Post subject: | Re: 3.50" copper head gasket |
Call Lani Visconti at Copper Gaskets Unlimited --> (623) 340-4300 Any bore size, any thickness. Cut on demand. https://coppergaskets.us/ |
|
| Author: | Dart270 [ Sat Aug 05, 2023 11:15 am ] |
| Post subject: | Re: 3.50" copper head gasket |
I may have a spare if you need it on short notice. I'll try to remember to look soon... Lou |
|
| Author: | slantzilla [ Sun Aug 06, 2023 7:52 am ] |
| Post subject: | Re: 3.50" copper head gasket |
I think I have some copper gaskets from Mike's stash, but it will be awhile before I'm allowed to travel.
|
|
| Author: | Will [ Mon Aug 07, 2023 4:11 am ] |
| Post subject: | Re: 3.50" copper head gasket |
I normally use Hussey, but have used copper gaskets as well. Will |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|