Metal with a small stud in the center. Computer is acting up. Having trouble getting picture posted.
Here is the trim on the dash I/m using.
Attachment:
65-3.jpg [ 65.21 KiB | Viewed 208 times ]
| Slant Six Forum https://www.slantsix.org/forum/ |
|
| 65 Valiant /Barracuda dash clips https://www.slantsix.org/forum/viewtopic.php?t=68259 |
Page 1 of 1 |
| Author: | Rick Covalt [ Wed Jun 18, 2025 2:42 pm ] |
| Post subject: | 65 Valiant /Barracuda dash clips |
I am putting together a new dash for my car with the gauges mounted differenntly and I am going to install the aluminum dash trim that runs side to side.From behind the headlight switch across to the heater control to the glove box...etc. I have the moulding but I am in need of the clips that hold it place. If someone has a car they are parting, or just some of the clips, I'd be interested in some clips. I have 2 both probably need 8 total. I'll post a picture soon. Thanks. |
|
| Author: | Greg Ondayko [ Wed Jun 18, 2025 4:45 pm ] |
| Post subject: | Re: 65 Valiant /Barracuda dash clips |
Post that photo. Metal or plastic clips? |
|
| Author: | Rick Covalt [ Wed Jun 18, 2025 5:46 pm ] |
| Post subject: | Re: 65 Valiant /Barracuda dash clips |
Metal with a small stud in the center. Computer is acting up. Having trouble getting picture posted. Here is the trim on the dash I/m using. Attachment: 65-3.jpg [ 65.21 KiB | Viewed 208 times ] |
|
| Author: | Rick Covalt [ Wed Jun 18, 2025 5:57 pm ] |
| Post subject: | Re: 65 Valiant /Barracuda dash clips |
Yes, it was not upside down when I posted it. I'll get a picture of the clip tomorrow. Click the photo and it turns it right side up! 
|
|
| Author: | Rick Covalt [ Sat Jun 21, 2025 5:34 pm ] |
| Post subject: | Re: 65 Valiant /Barracuda dash clips |
Here are the clips I looking for. Attachment: IMG_0362.jpg [ 34.2 KiB | Viewed 150 times ] Attachment: IMG_0363.jpg [ 28.73 KiB | Viewed 150 times ] |
|
| Author: | Greg Ondayko [ Sun Jun 22, 2025 3:44 pm ] |
| Post subject: | Re: 65 Valiant /Barracuda dash clips |
If you cannot locate them, lots of universal body trim clips can work. Check with Robbie or in the Au-ve-co catalog. https://www.auveco.com/products/bodyhar ... dfasteners |
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|