| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Multi Layer steel Head gaskets, Big Bore https://www.slantsix.org/forum/viewtopic.php?t=68449 |
Page 1 of 1 |
| Author: | Rick Covalt [ Tue Dec 02, 2025 9:42 am ] |
| Post subject: | Multi Layer steel Head gaskets, Big Bore |
My son Ryan is getting ready to place another order for a bunch of the genuine MLS head gaskets for our engines. He has some already that will work with the Aluminum engines in the smaller bore size. But he will be ordering more of the 3.66" big bore gaskets. He will be ordering these in .040 thick, but he can get them in .080" and .120" thickness as well. If anyone is interested in one of the thicker gaskets please let me know here and he can order them for you. If no replies come in he will likely get them all in the .040" thickness. Since we can't get the Big Bore Ozzie head gasket anymore, this will fill the need for those of us looking to go .100 overbore. |
|
| Author: | Dart270 [ Tue Dec 02, 2025 11:27 am ] |
| Post subject: | Re: Multi Layer steel Head gaskets, Big Bore |
Hi Rick, Super! I've been wondering about these and seeing Ryan's auctions on Ebay too. Do we have an idea of pricing? No need to be exact, but the ballpark will affect how many I order. I have been trying to drop CR with the heads I have sometimes, so I'll be in for at least one of the 0.120" thick 3.66" bore versions, and likely a 0.040" or two. Anyone planning to build an aluminum engine should get the 3.45" bore version! Thanks again, Lou |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|