2 words; CAR QUEST or if you don't have one nearby, try these 2; GOOD COUNTERMAN
| Slant Six Forum https://www.slantsix.org/forum/ |
|
| valve cover gasket can't find one https://www.slantsix.org/forum/viewtopic.php?t=7225 |
Page 1 of 1 |
| Author: | sailit2000 [ Tue Oct 14, 2003 3:35 pm ] |
| Post subject: | valve cover gasket can't find one |
Been to three part houses and they are all trying to sell me the same gasket. It just does not fit my cover. I have a D-150 with a slant six motor I guess it is a 225 (3.7L motor) The cover has 4 holes with the tits facing inward on one side and the other side the tits face outward. Is this a big deal or am I just having a bad day. Thanks, Fran |
|
| Author: | kesteb [ Tue Oct 14, 2003 4:15 pm ] |
| Post subject: | |
What year is your slant. All valve covers from '60 to '79 are the same. Valve covers from '80 on are differant. |
|
| Author: | Pierre [ Tue Oct 14, 2003 4:31 pm ] |
| Post subject: | |
Try the dealer, I got a mopar rubber gasket a year or two ago and it worked like a charm. |
|
| Author: | sailit2000 [ Tue Oct 14, 2003 4:46 pm ] |
| Post subject: | |
Quote: Try the dealer, I got a mopar rubber gasket a year or two ago and it worked like a charm.
Thank you that is what I will do I called Pepbay and Advanced Auto and they only had the wrong one in stockFran |
|
| Author: | 63gtcv [ Wed Oct 15, 2003 7:53 pm ] |
| Post subject: | |
NAPA |
|
| Author: | jsbgraphics [ Thu Oct 16, 2003 9:55 am ] |
| Post subject: | |
I just got one from NAPA, it is a Cork/Rubber the only thing I didn't like about it was the tabs didn't fit to well, other than that no problems. |
|
| Author: | Loghead [ Thu Oct 16, 2003 12:40 pm ] |
| Post subject: | there's the problem! |
"I called Pepbay and Advanced Auto" unless your working on a rice burner, PepBoys is a place to stay away from, and Advanced ain't much better. |
|
| Author: | volaredon [ Thu Oct 16, 2003 6:22 pm ] |
| Post subject: | theres the problem II |
2 words; CAR QUEST or if you don't have one nearby, try these 2; GOOD COUNTERMAN
|
|
| Author: | zorg [ Thu Oct 16, 2003 8:47 pm ] |
| Post subject: | |
Last I checked, these guys had them. (Along with complete engine sets) www.olsonsgaskets.com |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|