New cam arrived...valve lash?

Unanswered topics | Active topics

Home » Board index » Tech Q & A » Engine

All times are UTC-08:00

New cam arrived...valve lash?

Post new topic Reply to topic

Page 1 of 1

[ 2 posts ]

Print view

Previous topic | Next topic

Author

Message

66coronet

Post subject: New cam arrived...valve lash?

PostPosted: Tue Dec 23, 2003 7:29 pm

Offline

1 BBL (New)

Joined: Thu Dec 04, 2003 1:01 pm
Posts: 3
Car Model:

Well, my purpleshaft came in today. Here are the specs from the box:
.528", 284 duration, 76 overlap, 102 centerline. Anyone have any idea what valve lash is needed to run this cam?

Top

Profile

Reply with quote

DusterIdiot

Post subject: 343?

PostPosted: Tue Dec 23, 2003 10:10 pm

Offline

Board Sponsor

Joined: Tue Oct 29, 2002 8:27 pm
Posts: 9714
Location: Salem, OR
Car Model:

MP guide says MP p/n P4529343
Mech lifters adv dur=284/284 76 overlap .528 lift Valve lash= .028/.032 Cam c-line=104 installed c-line=102

good luck, make sure to lap the oil pump gear in lots of posts about MP cams chewing up them gears...

-D.Idiot