| Slant Six Forum https://www.slantsix.org/forum/ |
|
| /6 motors https://www.slantsix.org/forum/viewtopic.php?t=8563 |
Page 1 of 1 |
| Author: | MRK270 [ Sun Feb 29, 2004 7:42 pm ] |
| Post subject: | /6 motors |
Is there any were to buy a assembled /6, like a create motor? |
|
| Author: | Pierre [ Sun Feb 29, 2004 9:48 pm ] |
| Post subject: | |
I'm pretty sure you can get rebuilt longblocks at kragen or your local parts store. A few years ago chyrsler dealers were still offering them as well for $1700. Worth a shot. |
|
| Author: | ShivaDart [ Sun Feb 29, 2004 9:49 pm ] |
| Post subject: | |
I don't know for sure, but I doubt it. You can buy remanufactured engines but I'm not sure how fully assembled they are. If you have a need for an engine though many junkyards have a service section that would do a swap for you and considering the durability of the /6 as long as it doesn't smoke it shouldn't be a problem My engine's a testament to the /6's strength, it's leaking oil, the valve cover's benter at the top, and the exhaust manifolds not only cracked but looks as though when I finally end my long quest for manifolds like I may have to replace every screw on my intake and exhaust manifolds. Yet the engine sounds great and I have all the confidence in the world that the thing won't die on me as I make my slow quest for parts to bring it back up to it's former glower. |
|
| Author: | DusterIdiot [ Sun Feb 29, 2004 10:16 pm ] |
| Post subject: | Remanf's available.... |
Last time I inquired a year or so back, Schuck's (Kragan's) quoted me something like $900 for a short block (not including core charge), and $1300 for a long block (not including the core charge)...the price was the same for either forged or cast crank mills.... -D.Idiot |
|
| Author: | argentina-slantsixer [ Mon Mar 01, 2004 2:30 am ] |
| Post subject: | |
Hey I saw some milling shop selling rebuilts on eBay. The lower half was priced about 350 bux (fixed price, "buy it now") and I also saw rebuilt heads for something like 150 bux (post 7something head, cast sparkplug tubes) give it a shot, try searching slant 6 and slant six (something you find good stuff this way!) |
|
| Author: | argentina-slantsixer [ Mon Mar 01, 2004 2:51 am ] |
| Post subject: | |
 look all this super interesting stuffhttp://cgi.ebay.com/ebaymotors/ws/eBayI ... 2462861637 http://cgi.ebay.com/ebaymotors/ws/eBayI ... 2463275497 http://cgi.ebay.com/ebaymotors/ws/eBayI ... 2463590768 http://cgi.ebay.com/ebaymotors/ws/eBayI ... 2463880579 I think that you'll be able to get some under 1000 
|
|
| Author: | Godspeedglen [ Wed Mar 03, 2004 10:29 am ] |
| Post subject: | |
Hey -Just thought I'd throw in my two cents----I bought one of those motors from this guy listed on ebay. Good guy to deal with-- good one the shipping ( from Indiana). I've put some hypo stuff on his short block and had very good sucess! They are bore over .040, and I believe that the crank is turned. You can't have it machined for that 350 bucks! buy it now!! |
|
| Author: | newpoppop [ Tue Mar 09, 2004 6:23 pm ] |
| Post subject: | slants |
Sorry, I won the 2nd one... $51 Bucks... can't beat it... dropped it in Sunday, working on getting the 2 bbl on, and fire it up... it was a JY pull at some point. it said 62K on the block under the flex plate... Wish me luck... Chris |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|