| Slant Six Forum https://www.slantsix.org/forum/ |
|
| 1 barrel to 2 barrel adapter https://www.slantsix.org/forum/viewtopic.php?t=8639 |
Page 1 of 1 |
| Author: | wholesalepricebusters [ Sun Mar 07, 2004 5:51 pm ] |
| Post subject: | 1 barrel to 2 barrel adapter |
I have a slant six with a 1 barrel aluminum intake manifold. I want to keep the manifold but install a 2 barrel for better gas mileage. Does anyone know where I can find one at? |
|
| Author: | Pierre [ Sun Mar 07, 2004 5:54 pm ] |
| Post subject: | |
Chris at prolinefuel.com can help you out. |
|
| Author: | wholesalepricebusters [ Sun Mar 07, 2004 5:57 pm ] |
| Post subject: | |
I don't want to run a Weber. That's the only problem with your suggestion. |
|
| Author: | Eric W [ Sun Mar 07, 2004 7:16 pm ] |
| Post subject: | |
I think Mr. Gasket makes an adapter. Don't know what kind of carb. you will have to use, though you can modify the adapters. |
|
| Author: | Lee329@aol.com [ Sun Mar 07, 2004 11:37 pm ] |
| Post subject: | carb adapter |
tried summit racing, they have a TD carb adapter #2025 for around $20 |
|
| Author: | Guest [ Mon Mar 08, 2004 9:40 am ] |
| Post subject: | |
The adaptor doesnt care what 2-bbl you put on it. I just used one of the Mr.Gasket that I got from Stovebolt.The 1-bbl opening may need some massaging to match the manifold. Also either shorter studs or carb spacer, as there is not much space as the adaptor flares in one position. |
|
| Author: | Swingin74 [ Tue Mar 09, 2004 12:54 pm ] |
| Post subject: | Becareful (Adapter) |
Dude just make sure you will have enough hood clearance. i bought one and installed it the to find out . the hood would not shut. I have one brand new in the package if you need it. for some reason they sent me two.. |
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|