Slant Six Forum
https://www.slantsix.org/forum/

A Body Rear End
https://www.slantsix.org/forum/viewtopic.php?t=9106
Page 1 of 1

Author:  VDART [ Tue Apr 20, 2004 10:43 pm ]
Post subject:  A Body Rear End

I know some of you customizers will know, I have a 62 Valiant with the small bearings (7 1/4 rear 3.23 gear) etc..., they all work, my question is where can I find a 63- up 7 1/4 rear that still has 3xx gears(so when my bearings go I'll be ready), all the ones I run across are 2.76 & my stock 170 needs all the help it can get, I'm running 205/70/14's & would really like to keep that size tire as opposed to running garden tractor tires. Any help/info would be appreciated... I live in Kansas so I'm the same distance to everybody.... thanks, Budget is important just like most of the sixers keep it running on minimal $$., 8)

Would like to keep 5x4 Love my slots, but an 8 1/4 would work also

Author:  SBNEWC33 [ Thu May 13, 2004 12:35 pm ]
Post subject: 

Just last month I "donated" a 73' 7.25 with 3.23 gears to Massey & Sons Auto Salvage here in Topeka, KS (785-232-5708). I just now noticed your post so they may not still have it but you or I could check.

Author:  slantzilla [ Thu May 13, 2004 7:36 pm ]
Post subject: 

Look for Slant cars with a manual trans, especially a 3 speed. Many of them were 3.23 gears. :shock:

Page 1 of 1 All times are UTC-08:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/