Damn!
I was going to go to that very swapmeet today until I saw the weather.
| Slant Six Forum https://www.slantsix.org/forum/ |
|
| Wiper blade replacements https://www.slantsix.org/forum/viewtopic.php?t=9136 |
Page 1 of 1 |
| Author: | busboy [ Fri Apr 23, 2004 3:31 pm ] |
| Post subject: | Wiper blade replacements |
Does anyone know of a supplier for the Trico wiper blades from a 65' Polara 880. They are a kind of cool stainless arm with a metal/rubber combination blade. Trico has no listing for anything that old either. Any leads would be great, thanks. |
|
| Author: | villbo [ Sun Apr 25, 2004 6:32 pm ] |
| Post subject: | |
Hi, You'll have a hard time finding those at a regular car parts store. Your best bet is to take the measurement and go to some of your local automotive swap meets and see if you can find some there. As a matter of fact, I saw one of the local vendors at a swap meet in Ancaster, Ontario earlier today. Good Luck! |
|
| Author: | steponmebbbboom [ Mon Apr 26, 2004 2:48 am ] |
| Post subject: | |
Damn! I was going to go to that very swapmeet today until I saw the weather. |
|
| Author: | Rob Simmons [ Mon Apr 26, 2004 4:42 am ] |
| Post subject: | |
Weather and wiper blades... I finally started driving my project Dart this weekend. I figured I'd drive it to work this morning to get some miles on it and get everything broken in well.... It is raining in Atlanta today.... I didn't put my wiper arms back on    It's Monday! |
|
| Author: | mighty mouse 63 [ Tue Apr 27, 2004 5:31 pm ] |
| Post subject: | |
I found my last 13 stainless steel inchers at a local Auto Zone. Imagine my surprise! Bought every set they had, the quality could be better and they don't include the clips, but hey, watcha going to do?
|
|
| Page 1 of 1 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|