Slant Six Forum
https://www.slantsix.org/forum/

dynomax turbo mufflers
https://www.slantsix.org/forum/viewtopic.php?t=9662		 Page 1 of 1
Author:  '65 Dutch Dart [ Fri Jun 25, 2004 1:18 am ]
Post subject:  dynomax turbo mufflers
Does anyone know the part number for the dynomax turbo mufflers that everyone seems to be using? I like the idea of not being too loud, but gain a bit performance wise. Besides; is it ok to go from 2.5" to 2.25" and then to 3" and then back to 2.50", etc, exhaustpipe? I'm not saying I'm going to do this, but I'm interested in the physical side of this story, to do or not to do?
Author:  sixinthehead [ Fri Jun 25, 2004 4:38 am ]
Post subject: 
Walker part# 17731, 2.25 inlet/outlet, fits A-bodies very well, and it's only 35 bucks from Summit.
http://store.summitracing.com/
I don't know about shipping to you though :wink:
Changing the diameter, therefore volume, of the pipes plays with the velocity of the gas. You should minimize these changes to avoid weird backpressure pulses. The gas contracts as it cools, so smaller tailpipes usually are ok, but I wouldn't go big-small-big-small or whatever.
My 2 bits (25c, don't want to sell myself short :D )
Author:  '65 Dutch Dart [ Fri Jun 25, 2004 5:39 am ]
Post subject: 
sixinthehead: Thanks for the part#! I've ordered them straight away
Author:  chi/6er [ Sat Jun 26, 2004 11:36 pm ]
Post subject:  muffler
65 Dodge Dart...I got my Flowmaster 40 on ebay for about $40...got good sound and not as loud as some say...got that flowmaster rumble I guess...You can hear the sound on the sellers ebay site...just look up flowmaster 40 on ebay search....Jerry

Also I finish that console to hold the radio and 3 gauages and 2 speakers that we talked about a week ago...thanks for you suggession...Jerry
Author:  '65 Dutch Dart [ Mon Jun 28, 2004 10:33 am ]
Post subject: 
Hi Jerry,
Good to hear your also made your own console, I've painted mine 2 days ago, (I'm re-painting the whole inside of the car btw) I'll make a picture of it when it's in the car again.
Have you got a picture of your console, I'm wondering how it looks! :?:

I already ordered two Dynomax turbo mufflers, they should be here the end of this week, hopefully.
I want to go from the clifford dual headers into 2.25" pipes, to the mufflers, then 2.25" over the axle and some 2.50" or maybe even 3" end pipes under the bumper for the looks. :twisted:

Anyone who knows how 2 of those dynomax's will sound on a dual exhaust system, It looks that most of the guys over here use them on single 2.25" exhaust systems, right?

Can't wait to try! (Finally!! They will be put on after the new engine is dropped in, in about 4/5 weeks. And the car goes to the painter on the 5th of July! :D )
Author:  chi/6er [ Tue Jun 29, 2004 1:41 am ]
Post subject:  dynomax
65 Dutch Dart...I tried and get a picture of my console, it was something that I did in a day....Also those dual Dynomax should sound great, I think the headers will really help a lot.....I just have a single going into a 2 1/4" all the way...Jerry
Page 1 of 1 All times are UTC-07:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/