what exhaust flange can be used with the Dutra Exhaust Manifold? i have one for my 65 exhaust manifold, but it doesn't fit the Dutra....

any ideas where i can get the one i need?

sb

Your nearest muffler shop? That's where I get mine...

VM

any idea what car they fit?

sb

They're not vehicle-specific. Exhaust flanges are exhaust flanges. They have a centre hole for the pipe, and two bolt holes. They differ only in the sizing of the centre hole and the spacing of the bolt holes.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

ok;

i realize what you are saying....BUT if i go out to the junkyard and try to measure every exhaust flange i find, i might find it on the first try or the 1000th or not at all...i would like to go out to the pick and pull and get a short section of head pipe from say a 1980 Dodge with a slant six, or a Mitsubishi 4 banger etc etc, so i can do up my own exhaust.

i have the measurements for the Dutra outlet, and i know for a fact the flange off my 65 won't bolt up, but if anyone can tell me where to get the flange (online listing by measurement?) i would be glad to buy just that and let someone else do the exhaust...OR if need be go JYing and chop out the section i need.

It will be much easier to source the flange as a new part. Good exhaust shops have dozens of different ones!

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

The ones at my local muffler shop have slotted bolt holes, so they fit different bolt spacing. And they're only a buck or two each. Heck, one time they just GAVE one to me.

And you wanna go scrounge a JY for one...?

VM