does someone still build a 6 into 1 header for the slant i think it was mopar that used to but i don't think they build slant six parts anymore

_________________
MOPAR OR NO CAR
1985 Ram
1975 Coronet
1998 Dakota

does mopar performance build anything for the slant six anymore because i know that is were i got my cam and can't even find it anymore

_________________
MOPAR OR NO CAR
1985 Ram
1975 Coronet
1998 Dakota

Here in Mexico since 8-12 years ago is impossible to get things for Slant 6 engine from Mopar, don´t know in other countrys but this is stupid, almost 70% of A and B Bodies here got Slant 6 engines in.

_________________
Mopar Muscle is well defend by Slant Six!

Valiant Duster 1971

i got my cam about 5 years ago i'm going to call my local chrysler dealer tomorrow see what they can tell me

_________________
MOPAR OR NO CAR
1985 Ram
1975 Coronet
1998 Dakota

Yes. Mopar performance dropped slant six specific stuff years ago. Some of the v-8 parts will interchange, and there are still lots of parts available aftermarket.

ok dose anyone else offer a 6 into 1 set of headers

_________________
MOPAR OR NO CAR
1985 Ram
1975 Coronet
1998 Dakota

Clifford. Not the Big Red Dog.

they don't show any on there web site so i guess i'll give them a call

called clifford and the six into one has been discontinued by them as well
i think i'm out of options for a six into one unless i build my own (well get my dad to build them i can't weld) or find a set at a swap meet

_________________
MOPAR OR NO CAR
1985 Ram
1975 Coronet
1998 Dakota

If you call summit racing they have hooker headers in a 6into1 setup but hold your breath they are like 450 if my memory is correct.

Watch the classifieds here and E-bag. Headers show up all the time.

The MP header was made by J&R. If you can find them, they may still make the part. IIRC J&R was down south somewhere.

_________________
Official Cookie and Mater Tormentor.

Yeah, MP dropped slant-6 support many years ago. But hey, don't fret...they can sell you a fart pipe for your Neon, or a set of kewl blue Sylvania Silverstar headlight bulbs, or...um...yeah.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

So bassically mopar performance is now just a joke

I'm either going to build a set of dutra duals or buy a set of headers from Clifford performance and with the rate the canadian dollar is trading at right now it would be a good time to get a set

_________________
MOPAR OR NO CAR
1985 Ram
1975 Coronet
1998 Dakota

Well, basically is a joke for Slant Six engines, but not for V8 engines and some V6.

I think is just matter of popular demand

_________________
Mopar Muscle is well defend by Slant Six!

Valiant Duster 1971

Mopar Performance is a business; it is run by dollars and cents (sense), not by emotional attachments. Realistically, the slant six performance market just isn't large enough to sustain the revenue that makes sense for them.

_________________
David Kight
'62 Valiant Signet, White
'98 Dodge Dakota
'06 Jeep Liberty

Growing older is unavoidable but growing up is strictly optional.

every year there are at least 2-3 sets of /6 headers at the swap meet in Carlisle. 3 years ago I got my Clifford dual outlet w/ the Y-pipe for $75. the same year there were Hooker duals there the guy wanted $175. If I had any money I would buy up as many as i could but that is a big IF. last year I picked up my Clifford 4-barrel intake for $125. I could tell it had never been used.
If you seriously want headers you need to get yourself to as many swap meets as you can and spend some time searching. They are out there if you are willing to put in the time to find them.

_________________