Slant *       6       Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Tue Jul 15, 2025 4:21 pm

Unanswered topics | Active topics


» » Tech Q & A » Old Message Board

All times are UTC-07:00



Forum locked  This topic is locked, you cannot edit posts or make further replies.  Page 1 of 1
  [ 4 posts ] 
  Print view Previous topic | Next topic 
Author Message
mark dingbaum
 Post subject: Piston L2125 info?
PostPosted: Mon Jan 14, 2002 9:50 am 
Hi,

Anyone recognize the L2125 number from the top of my pistons? I'd guess maybe a TRW piston? Flat top, no valve reliefs.

Anyone have technical info on these? Compression height, forged/cast, etc?

thanks in advance,
mark

mldingba@collins.rockwell.com
Top
   
Reply with quote  
GTS225
 Post subject: Re: Piston L2125 info?
PostPosted: Mon Jan 14, 2002 1:37 pm 
Quote:
: Anyone recognize the L2125 number from the top
: of my pistons? I'd guess maybe a TRW piston?
: Flat top, no valve reliefs.

**************************************************
Yep, you're right. TRW pistons....is there any indication of the letter F behind the 5? I know that piston was offered in a forged version, but am unsure if the cast was a different number, or the only difference was the "F" designation.
:
: Anyone have technical info on these?
: Compression height, forged/cast, etc?
**************************************************
Doug might be able to help here, sorry.

Roger


GTS225@aol.com
Top
   
Reply with quote  
Doug P.
 Post subject: Re: Piston L2125 info?
PostPosted: Mon Jan 14, 2002 6:34 pm 
Quote:
: Hi Mark, I looked the L2125F pistons up in the TRW Specifications book. They are as followes: Comp. Dist. 1.752", Powerforged, 2-5/64" and 1-3/16" rings, .9011" pin dia. I hope this answers your questons. Doug
:
: Anyone recognize the L2125 number from the top
: of my pistons? I'd guess maybe a TRW piston?
: Flat top, no valve reliefs.
:
: Anyone have technical info on these?
: Compression height, forged/cast, etc?
:
: thanks in advance,
: mark



Valient64@aol.com
Top
   
Reply with quote  
mark dingbaum
 Post subject: Thanks! No message *NM*
PostPosted: Tue Jan 15, 2002 6:36 am 
mldingba@collins.rockwell.com
Top
   
Reply with quote  
Display posts from previous:  Sort by  
Forum locked  This topic is locked, you cannot edit posts or make further replies.  Page 1 of 1
  [ 4 posts ] 

» » Tech Q & A » Old Message Board

All times are UTC-07:00

Who is online

Users browsing this forum: No registered users and 3 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited