Hey Everyone,

I have a 1985 Dodge Ram 100. It has a 4 Speed Transmission and a Slant Six. Im wondering if the Clutch Fork and everything from how it is now, will work on a 318? I already have the bellhousing and flywheel to convert it.

Im sorry its not going to be a slant six anymore. Any help would be great though.

Thanks!

-Cam-

Those parts on a car are different from slant to 318. Some of them are the same, but many are not. I wish I could speak with certainty. Duster Idiot probably can give you part numbers that are the same by looking in his books. I am pretty sure the fork, and the Z bar are different. The clutch pedal is the same. I am also pretty certain the ball that mounts on the bell housing for the Z bar pivot is different. These parts are pretty readily available for a V-8 however. Year One sells them. The shifters are the same. The flywheel and clutch plate obviously are different too.

Sam

_________________

So i've changed my mind. Im going to be smart and stick with the slant six. Where I live, I havent seen many around, especially any that are going to be a little built up.