Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Mon Oct 27, 2025 3:51 pm

All times are UTC-07:00




Post new topic  Reply to topic  [ 6 posts ] 
Author Message
 Post subject: Oil filter lid gasket
PostPosted: Sat Jun 28, 2008 9:35 pm 
Offline
TBI Slant 6

Joined: Fri Nov 30, 2007 11:08 am
Posts: 130
Location: Kerrville, TX
Car Model:
Where do I find an oil filter lid gasket? I got a complete gasket for my motor and it's not in there. It's the removable cartridge type filter.

_________________
Stephan Nelle


Top
   
 Post subject: Yipes!
PostPosted: Sat Jun 28, 2008 9:38 pm 
Offline
Board Sponsor
User avatar

Joined: Tue Oct 29, 2002 8:27 pm
Posts: 9714
Location: Salem, OR
Car Model:
I think if doing a hi-po truck build... now is the time to deep six the cartridge canister and change to a standard filter, especially if you are
thinking of using a HV oil pump....

good luck,

-D.Idiot


Top
   
 Post subject:
PostPosted: Sat Jun 28, 2008 10:09 pm 
Offline
TBI Slant 6

Joined: Fri Nov 30, 2007 11:08 am
Posts: 130
Location: Kerrville, TX
Car Model:
Ok, I'll do it. Is that just a matter of removing the unit installing a spin on? When I got the new pump, it came with a male/male adaptor screwed on where the cartridge fits. I had to remove it order to fit the cartridge case on there. I assume that piece was for spin-on filters? Also, what spin-on filter do I get? Do you recommend a particular brand of filter?

_________________
Stephan Nelle


Top
   
 Post subject:
PostPosted: Sat Jun 28, 2008 10:17 pm 
Offline
Board Sponsor
User avatar

Joined: Sat Feb 08, 2003 2:37 pm
Posts: 4194
Location: CA
Car Model:
Yes, that male adapter is for the spin-on filter.

Wix 51515 napa gold 1515 for (most common) standard size filter. If you want standard filter with built in standpipe then thats wix 51806. If you want the higher capacity one it would be wix 51773 or napa 1773.


Top
   
 Post subject: Re: Yipes!
PostPosted: Sun Jun 29, 2008 6:41 am 
Offline
Board Sponsor & Contributor

Joined: Thu Oct 31, 2002 5:39 pm
Posts: 24763
Location: North America
Car Model:
Quote:
I think if doing a hi-po truck build... now is the time to deep six the cartridge canister and change to a standard filter
H'mm. What makes you say a spin-on filter would be better? I can't think of why it necessarily would be.

Replacement elements for the can-type filter usually include a complete set of new filter-related gaskets, as long as you're buying a good brand like NAPA Gold #1076 (Wix #51076)

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Image


Top
   
 Post subject:
PostPosted: Sun Jun 29, 2008 4:30 pm 
Offline
Supercharged
User avatar

Joined: Mon Jan 15, 2007 5:05 pm
Posts: 3767
Location: Black Diamond, WA
Car Model:
SL6 Dan suggested trying a Wix 1806 about a year ago, (was running the Wix 1515). Since I switched I will never go back. I get 50 lbs. oil pressure immediately on start up with Mobil 1, 0-30W oil. I running a stock oil pump with no mods to it. I built my engine a little tighter than most, per Doc's "torque and mileage" build plan. I took a little more care on break in, but it was worth the time.

_________________
Aggressive Ted

http://cid-32f1e50ddb40a03c.photos.live ... %20Swinger


74 Swinger, 9.5 comp 254/.435 lift cam, 904, ram air, electric fans, 2.5" HP2 & FM70 ex, 1920 Holley#56jet, 2.76 8 3/4 Sure-Grip, 26" tires, 25+MPG


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 6 posts ] 

All times are UTC-07:00


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited