Have been busy with the project for over a year - self funded - Pricing around 250 - 275 USD

_________________
Regards,
Fanie Gerber
It's never junk, it's just a part you're not currently using

http://www.valiant50.co.za
Just say I own a few Mopars

we can't wait Fanie!

MJ

_________________
Regards,
Fanie Gerber
It's never junk, it's just a part you're not currently using

http://www.valiant50.co.za
Just say I own a few Mopars

Absolutely freakin' sweet!

_________________
66 Lil' Red Piggie Valiant (Mater Crusher) - Thanks Zilla!!!!! 72 Demon (Number 1 Son's)

Sweet! If you are serious about selling these manifold for that kind of money I don't think you will have a problem getting rid of them. I'm in for an offy cover but count me in for the "African" intake.

_________________
Chris'
Autobody
Restoration
Service

where is my popcorn?

_________________
'72 Duster 198 stock cam, 3:23's Hookers on jack stands for 8 years in the driveway
'79 Maxivan 360 Offy Qjet Comp RV cam/rusting in the driveway.
93 D350 160HP Cummins Auto Dually Clubcab needs a injector pump
2005 Golden Couch Buick

Will be off by the time these things land yourside

_________________
Regards,
Fanie Gerber
It's never junk, it's just a part you're not currently using

http://www.valiant50.co.za
Just say I own a few Mopars

Enjoying yerself?

_________________
Regards,
Fanie Gerber
It's never junk, it's just a part you're not currently using

http://www.valiant50.co.za
Just say I own a few Mopars

Quite serious they will be cast with the Chrysler South Africa partnumber on the number 5 runner.

The air cleaner is the original used back in the day - am trying to have a mold made up for this as well but manifold first

Will you guys be interested in completed linkage sets which will ad cost, or the plans for them which will be free.

_________________
Regards,
Fanie Gerber
It's never junk, it's just a part you're not currently using

http://www.valiant50.co.za
Just say I own a few Mopars

Looks RAD. Also looks a bit tall to squeeze under the hood of a 62 Valiant hehe. Maybe in the original hyperpak style-- hole cut in the hood. =)

_________________
-
-
-Anthony
1962 Plymouth Valiant Signet 200

I know the Offy 2x1 won't clear my A/C compressor.............I would have bought a Proline set up when he was in business.

_________________
'72 Duster 198 stock cam, 3:23's Hookers on jack stands for 8 years in the driveway
'79 Maxivan 360 Offy Qjet Comp RV cam/rusting in the driveway.
93 D350 160HP Cummins Auto Dually Clubcab needs a injector pump
2005 Golden Couch Buick

Well, got my intake back from the welder, and went to see how the carbs looked on it. And the studs on the mounting pads were about 2mm more widely spaced than the holes in the carb bases. So, looks like I'm gonna have to file out the holes to a nice set of slots to fit the intake. Meanwhile, whilst cleaning out the interior of the intake, I also took a file to the outside, and removed a few of the projections that I won't be needing...namely the throttle rod pivots for early A-bodies...

_________________
Y'know, my Dart sounds a lot like Anthony Michael Hall's Canadian girlfriend in "The Breakfast Club"...

I'll be waiting for this intake, and will need the linkage and possibly air cleaner as well.

My vote: LINKAGE YES!

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

X2! Anything to make the install go easier.

_________________
Chris'
Autobody
Restoration
Service