I just pulled the crank out, and I'm about to pull the pistons. I just don't know exactly how to do it. I wanted to ask you guys before I messed something up. Thanks.

_________________

65' Dart. A work in progress..
______________________
Joe

if you have a large ridge at the top of the piston hole you'll need to remove it or you take the chance of breaking the piston lip. if none or very little ridge just push it out the top.

Thanks for the reply. I scaped away the ridge and out they came. Now it's off to the oven.

_________________

65' Dart. A work in progress..
______________________
Joe