Slant *       6       Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Sat Jun 21, 2025 7:59 am

Unanswered topics | Active topics


» » Other » Slixer's Gallery

All times are UTC-07:00



Post new topic  Reply to topic  Page 1 of 1
  [ 12 posts ] 
  Print view Previous topic | Next topic 
Author Message
Speeddm
 Post subject: New Member Scamp build
PostPosted: Mon Jul 20, 2009 12:11 pm 
Offline
2 BBL ''SuperSix''

Joined: Mon Jul 20, 2009 11:51 am
Posts: 15
Car Model:
Good Day fellow /6 owners. I figured Id say hi for the first time and show you a bit of what Ive been up to.
Enjoy!
Image
Image
Image


There is a small 100 shot going on the car as well. The 225 is forged internals and 2750miles on the rebuild. Should be fun. 3.90 gear in the rear with a soft locker.

[/img]
Top
   
Reply with quote  
Dart270
 Post subject:
PostPosted: Mon Jul 20, 2009 12:34 pm 
Offline
Board Sponsor & Moderator
User avatar

Joined: Mon Oct 21, 2002 11:08 am
Posts: 16977
Location: Blacksburg, VA
Car Model:
Nice car and welcome to the site! Where are you located? Hope you enjoy the ride...

Lou

_________________
Home of Slant6-powered fun machines since 1988
Top
   
Reply with quote  
vynn3
 Post subject:
PostPosted: Mon Jul 20, 2009 1:41 pm 
Offline
Turbo EFI
User avatar

Joined: Fri Jul 16, 2004 5:22 am
Posts: 1134
Location: Carrollton, TX
Car Model:
Nice work! And your engine pic answered a question I'd been wondering about for a while now – will the Aussie intake fit with power brakes?

Looks like it will limit air cleaner choices, though... :)

Thanks for sharing!

_________________
vm

Image
Top
   
Reply with quote  
Speeddm
 Post subject:
PostPosted: Mon Jul 20, 2009 2:59 pm 
Offline
2 BBL ''SuperSix''

Joined: Mon Jul 20, 2009 11:51 am
Posts: 15
Car Model:
Aussie intake. will not actually fit. i looks like it does but not quite. Im converting to Manual brakes tomorow
Top
   
Reply with quote  
Speeddm
 Post subject:
PostPosted: Mon Jul 20, 2009 3:15 pm 
Offline
2 BBL ''SuperSix''

Joined: Mon Jul 20, 2009 11:51 am
Posts: 15
Car Model:
Corection the Intake WILL fit but the carb will need an Offset spacer. Its only a 1/2 inch . But the internal debate I am having Spacer vs Manual conversion has been a long one. And really I have a CNC to build the spacer. But is the spacer a shortcut or bla bla bla.

Your opinions are definatly welcome on this topic.

O Ya and for the record Mark at AssieSpeed has been GREAT to deal with. Very fast shipping.
Top
   
Reply with quote  
vynn3
 Post subject:
PostPosted: Tue Jul 21, 2009 5:36 am 
Offline
Turbo EFI
User avatar

Joined: Fri Jul 16, 2004 5:22 am
Posts: 1134
Location: Carrollton, TX
Car Model:
Quote:
Corection the Intake WILL fit but the carb will need an Offset spacer. Its only a 1/2 inch . But the internal debate I am having Spacer vs Manual conversion has been a long one. And really I have a CNC to build the spacer. But is the spacer a shortcut or bla bla bla.

Your opinions are definatly welcome on this topic.

O Ya and for the record Mark at AssieSpeed has been GREAT to deal with. Very fast shipping.
I don't have access to a CNC, but at least one company makes an offset master cylinder spacer for Hemi conversions that moves the MC outwards (I've never been able to find out how much, but certainly a 1/2 inch?). That's all assuming the the point of interference is the master cylinder...

_________________
vm

Image
Top
   
Reply with quote  
Speeddm
 Post subject:
PostPosted: Tue Jul 21, 2009 7:21 am 
Offline
2 BBL ''SuperSix''

Joined: Mon Jul 20, 2009 11:51 am
Posts: 15
Car Model:
Mopar make a spacer as well but it is intended for use with Manual brakes only.
Top
   
Reply with quote  
Speeddm
 Post subject:
PostPosted: Mon Jul 27, 2009 1:49 pm 
Offline
2 BBL ''SuperSix''

Joined: Mon Jul 20, 2009 11:51 am
Posts: 15
Car Model:
Simple update. Cars at the exhaust shop right now.
Image
Image
Please forgive the fuel line. New one is on the bench being built to plumb in the nos.
Top
   
Reply with quote  
Speeddm
 Post subject:
PostPosted: Wed Jul 29, 2009 1:50 pm 
Offline
2 BBL ''SuperSix''

Joined: Mon Jul 20, 2009 11:51 am
Posts: 15
Car Model:
Exhaust is finally finished.

Image
Image
Image
Top
   
Reply with quote  
72Duster08
 Post subject:
PostPosted: Wed Jul 29, 2009 5:29 pm 
Offline
TBI Slant 6

Joined: Sat Sep 06, 2008 7:32 pm
Posts: 177
Location: San Bernardino, CA
Car Model:
Exhaust looks nice man. Flowmasters? Would like to hear how it sounds haha
Top
   
Reply with quote  
MiDi
 Post subject:
PostPosted: Wed Jul 29, 2009 9:52 pm 
Offline
Board Sponsor
User avatar

Joined: Wed Oct 10, 2007 11:40 pm
Posts: 1533
Location: Seattle,WA
Car Model:
Quote:
Aussie intake. will not actually fit. i looks like it does but not quite. Im converting to Manual brakes tomorow
yeah i have been on the fence with that decision my self, i'm keeping my pwr booster and 2bbl manifold.

nice car and welcome to the forum!

btw i consider my self an exhaust guru and yours is amazing!

good job and clean work!

cheers!

_________________
"Marilyn" 64 Dart GT & "Stella" 64 Valiant V100 Sedan - 63 Norton Project
Image
Top
   
Reply with quote  
Speeddm
 Post subject:
PostPosted: Fri Jul 31, 2009 8:26 pm 
Offline
2 BBL ''SuperSix''

Joined: Mon Jul 20, 2009 11:51 am
Posts: 15
Car Model:
Hey thanks very much MiDi. Ive done a bit of exhaust wok before myself. THe last on I did was a 4" downpipe off a GT4088R. 4 " stainless piecut main pipe into a 4" electric dump with a 2.25" waste gate line tied in.
hers a pic of that car
Image


The Scamp was way easier.
Here is a pic of my NOS solinoid bracket I build.
Image
Top
   
Reply with quote  
Display posts from previous:  Sort by  
Post new topic  Reply to topic  Page 1 of 1
  [ 12 posts ] 

» » Other » Slixer's Gallery

All times are UTC-07:00

Who is online

Users browsing this forum: Ahrefs [Bot], Google [Bot] and 6 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited